3.0 x 1.4 x 0.8mm SMD OSXX3014C1A Ver.A.2 ■Features ■Outline ● Top view white LED (3.0 x 1.4 x 0.8mm) ● Super high brightness of surface mount LED ● Lead frame package with individual 2 pins ● ESD protection ● Compatible to IR reflow soldering. Dimension Cathode mark 2 1 ■Applications Side View Top View ● General lighting ● Decoration lighting ● Indicator 2 2 1 1 2, Anode 1, Cathode Unit:mm Tolerances: ∮0.1mm Back View ■Absolute (Ta=25℃) Maximum Rating Item ■Directivity Symbol Value Unit DC Forward Current IF 30 mA Pulse Forward Current* IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 110 mW Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +85 ℃ Lead Soldering Temperature Tsol 260℃/5sec - 0 0 *Pulse width Max 0.1ms, Duty ratio max 1/10 ■Electrical (Ta=25℃) -Optical Characteristics VF (V) Part Number Min. Color Typ. IR(µA) Max. IF=20mA Max. Iv(mcd) Min. Typ. VR=5V CCT Max. Min. Typ. 2θ1/2(deg) Max. Typ. IF=20mA OSW33014C1A White W ■ 2.9 3.1 3.6 10 2000 - 3000 5000K - 6000K 120 OSM53014C1A Warm White M ■ 2.9 3.1 3.6 10 2000 - 3000 2800K - 3500K 120 Note: * Vf tolerance: ±0.05V * Luminous flux measurement allowance is:±10% LED & Application Technologies http://www.optosupply.com 1 VER A.0 3.0 x 1.4 x 0.8mm SMD OSXX3014C1A Ver.A.2 ■Rank * Correspondence Table of Luminous Flux – Intensity ■Chromaticity Diagram LED & Application Technologies http://www.optosupply.com 2 VER A.0 3.0 x 1.4 x 0.8mm SMD OSXX3014C1A Ver.A.2 *Bin Range of Chromaticity Coordinates (OSW33014C1A) Code D06 X1 0.3221 Y1 0.3523 X2 0.3324 Y2 0.3612 X3 0.3324 Y3 0.3520 X4 0.3224 Y4 0.3420 D09 0.3224 0.3430 0.3324 0.3520 0.3323 0.3429 0.3228 0.3336 D12 0.3228 0.3336 0.3323 0.3429 0.3323 0.3337 0.3231 0.3243 D15 0.3231 0.3243 0.3323 0.3337 0.3322 0.3245 0.3234 0.3149 E03 0.3324 0.3612 0.3470 0.3738 0.3461 0.3637 0.3324 0.3520 E05 0.3324 0.3520 0.3461 0.3637 0.3452 0.3536 0.3323 0.3429 E07 0.3323 0.3429 0.3452 0.3536 0.3442 0.3435 0.3323 0.3337 E09 0.3323 0.3337 0.3442 0.3435 0.3433 0.3334 0.3322 0.3245 LED & Application Technologies http://www.optosupply.com 3 VER A.0 3.0 x 1.4 x 0.8mm SMD OSXX3014C1A Ver.A.2 *Bin Range of Chromaticity Coordinates (OSM53014C1A) Code G04 X1 0.4160 Y1 0.4199 X2 0.4373 Y2 0.4302 X3 0.4313 Y3 0.4166 X4 0.4112 Y4 0.4067 G06 0.4112 0.4067 0.4313 0.4166 0.4252 0.4030 0.4063 0.3936 G08 0.4063 0.3936 0.4252 0.4030 0.4192 0.3893 0.4015 0.3804 G10 0.4015 0.3804 0.4192 0.3893 0.4131 0.3757 0.3966 0.3672 H04 0.4373 0.4302 0.4518 0.4354 0.4453 0.4216 0.4313 0.4166 H05 0.4518 0.4354 0.4689 0.4408 0.4614 0.4265 0.4453 0.4216 H07 0.4313 0.4166 0.4453 0.4216 0.4387 0.4077 0.4252 0.4030 H08 0.4453 0.4216 0.4614 0.4265 0.4539 0.4123 0.4387 0.4077 H10 0.4252 0.4030 0.4387 0.4077 0.4322 0.3939 0.4192 0.3893 H11 0.4387 0.4077 0.4539 0.4123 0.4463 0.3980 0.4322 0.3939 H13 0.4192 0.3893 0.4322 0.3939 0.4256 0.3800 0.4131 0.3757 H14 0.4322 0.3939 0.4463 0.3980 0.4388 0.3837 0.4256 0.3800 *If color binning is required, only one color group is allowed for each chip within a reel. Chromaticity coordinate groups are measured with an accuracy of ±0.01 *Color coordinate is derived from the CIE 1931 chromaticity. *Bin rank of VF Rank (IF=20mA) DC Forward Voltage(v) White 88T-999 AAA BBB 2.9-3.2 3.2-3.4 3.4-3.6 *Forward voltage is measured with an accuracy of ±0.1V. LED & Application Technologies http://www.optosupply.com 4 VER A.0 3.0 x 1.4 x 0.8mm SMD OSXX3014C1A Ver.A.2 ■Typical Electro-Optical Characteristics Curves LED & Application Technologies http://www.optosupply.com 5 VER A.0 3.0 x 1.4 x 0.8mm SMD OSXX3014C1A Ver.A.2 RELIABILITY TEST REPORT CLASSIFICATION TEST TIME TEST CONDTION OPERATION If:20mA LIFE Ta:25+5 TEST ITME=1000HRS(-24HRS,+72HRS) ENDURANCE TEST HIGH R.H:90~95% TEMPERTURE Ta:65+5℃ HIGH HUMIDITY TEST ITME=240HRS(+2HRS) STORAGE HIGH Ta:105+5℃ TEMPERTURE TEST ITME=500HRS(-24HRS,+48HRS) STORAGE LOW Ta:-55+5℃ TEMPERTURE TEST ITME=500HRS(-24HRS,+48HRS) STORAGE TEMPERTURE 105℃~25℃~-55℃~25℃ CYCLING 60min 10min 60min 10min 20cycles ENVIRONMENTAL TEST THERMAL 105℃~-55℃ SHOCK 10min 10min 10cycles SOLDER Ta:260+5℃ RESISTANCE TEST ITME=10+1sec SOLDERABILITY Ta:230+5℃ TEST ITME=5+1sec JUDGMENT CRITERIA OF FALURE FOR THE RELIABILITY MEASURING ITME SYMBOL CONDITIONS INTENSITY IV IF=20mA FORWARD VOLTAGE VF IF=20mA FAILUER IV<0.5*INITIAL VALUE VF>1.2*INITIAL VALUE REVERSE CURRENT IR Vr=5V IR>2*SPEC LUMINOUS LED & Application Technologies http://www.optosupply.com 6 VER A.0 3.0 x 1.4 x 0.8mm SMD OSXX3014C1A Ver.A.2 ■Recommended Reflow Soldering Profile Surface mounting condition In automatic mounting of the SMD LEDs on printed circuit boards, any bending, expanding and pulling forces or shock against the SMD LEDs should be kept min. to prevent them from electrical failures and mechanical damages of the devices. Soldering reflow -Soldering of the SMD LEDs should conform to the soldering condition in the individual specifications. -SMD LEDs are designed for reflow soldering. -In the reflow soldering, too high temperature and too large temperature gradient such as rapid heating/cooling may cause electrical & optical failures and damages of the devices. -Wellypower can’t guarantee the LEDs after they have been assembled using the solder dipping method. LED & Application Technologies http://www.optosupply.com 7 VER A.0 3.0 x 1.4 x 0.8mm SMD OSXX3014C1A Ver.A.2 3) Manual soldering. - Lead solder Max. 300℃for max. 3sec, and only one time. - Lead-free solder Max. 350℃for max. 3sec, and only one time. - There is possibility that the brightness of LEDs is decreased, which is influenced by heat or ambient atmosphere during reflow. It is recommended to use the nitrogen reflow method use the nitrogen reflow method. - After LEDs have been soldered, repairs should not be done. As repair is unavoidable, a doublehead soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will be damaged by repairing or not. - Reflow soldering should not be done more than two times. LED & Application Technologies http://www.optosupply.com 8 VER A.0 3.0 x 1.4 x 0.8mm SMD OSXX3014C1A Ver.A.2 ■Package Model Loaded Quantity 4000 pcs. Per Reel Reel Part Optosupply Label LED & Application Technologies http://www.optosupply.com 9 VER A.0