Oscilent Corporation IF SAW Filter | 838-IF70.0M-KA Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 838-IF70.0M-KA 38.0 x 25.0 Thru Hole Base Station & Repeater May 24 2003 . TYPE : 70.0 MHz Bandpass Filter 18.6 MHz Bandwidth PART NUMBER : 838-IF70.0M-KA .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 69.94 70.00 70.06 MHz Insertion Loss - 25.5 27.0 dB 1dB Bandwidth 18.40 18.45 - MHz 3dB Bandwidth 18.60 18.65 - MHz 40dB Bandwidth - 19.50 19.60 MHz 50dB Bandwidth - 19.60 19.70 MHz Passband Ripple - 0.60 1.0 dB Group Delay Variation - 55 100 nsec - 4.43 - µsec 50 55 - dB Center Frequency Absolute Delay Ultimate Rejection * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Contact Oscilent for Test Fixture Details http://www.oscilent.com/spec_pages/if_sawfilter/if_838_if70_0ka.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 838-IF70.0M-KA Page 2 of 2 Part No.: 838-IF70.0M-KA Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_838_if70_0ka.htm 12/28/2005