PANDUIT A101283

CUSTOMER DRAWING
L
J
(2 PLC)
E
C
B
A
4
2
3
1
PART NUMBER
WIRE
RANGE
D-436-36-COLD
26-24-22-20
D-436-37-COLD
18-16
D-436-38-COLD
14-12
L  1.0
(0.040)
A  0.5
(0.020)
B  0.25
(0.010)
C  0.5
(0.020)
E  0.25
(0.010)
J  0.50
(0.020)
36.8
(1.450)
37.7
(1.484)
37.7
(1.484)
4.2
(0.165)
5.1
(0.200)
5.9
(0.235)
2.0
(0.080)
2.9
(0.115)
3.8
(0.150)
3.7
(0.145)
4.5
(0.175)
5.2
(0.205)
12.1
(0.475)
14.3
(0.565)
14.3
(0.565)
12.7
(0.500)
11.8
(0.464)
11.8
(0.464)
END CAP
COLOR CODE
(BOTH ENDS)
RED
BLUE
YELLOW
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyvinylidene fluoride.
2. CRIMP:
Base Metal: Copper Alloy 101 or 102 per ASTM B-75, Annealed
Plating: Tin-plate per ASTM-B545
3. END CAPS: Thermoplastic, Color Coded (See Table)
4. GEL: Clear silicone based Gel.
APPLICATION
1. These parts are designed to provide immersion resistant in-line splices of 1 to 1 wires falling within size range listed above, and
having insulations rated for 105°C.
2. Crimp splices using a Tyco Electronics AD-1381 Crimp Tool.
3. Install Cold Crimp Splices per Tyco Electronics RPIP-1102.
4. This document takes precedence over documents reference herein.
5. Temperature range: -65C to +150C.
TITLE:
IMMERSION RESISTANT CRIMP SPLICE
150 DEG C, ROHS COMPLIANT
COLD APPLIED SPLICE
300 Constitution Dr
Menlo Park, CA
94025, U.S.A.
Unless otherwise specified dimensions are in
Raychem
millimeters.
Devices
[Inches dimensions are shown in brackets]
Tyco Electronics reserves the right to
ANGLES: N/A
TOLERANCES:
amend this drawing at any time. Users
0.00 N/A
should evaluate the suitability of the
ROUGHNESS
0.0 N/A
product for their application.
IN MICRON
0 N/A
ECO NUMBER:
REVISED BY:
CAGE CODE:
DOCUMENT NO.:
D-436-3X-COLD
REV:
DATE:
B
SCALE:
UNGUYEN
06090
ECO-11-004984
© 2010-2011 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
March 10, 2011
SIZE:
NTS
A
SHEET:
1 of 1