CUSTOMER DRAWING Product Name D-436-58 D-436-59 Dimensions Of Sub Splicer Color Max. Code Weight Blue 1.4 lbs/Mpcs Yellow 1.8 lbs/Mpcs I.D. CMA Range 7792680 19006755 O.D. min max min max 1.63 (0.064) 2.46 (0.097) 1.75 (0.069) 2.59 (0.102) 2.57 (0.101) 3.73 (0.147) 2.69 (0.106) 3.89 (0.153) MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. MELTABLE SEALING INSERT: Modified, immersion resistant thermoplastic. Color: natural. 3. MELTABLE SEALING INSERT: Modified, immersion resistant thermoplastic. Color: natural. 4. SEAMLESS STUB SPLICER: BASE METAL: Copper alloy 101 or 102 per WW-T-775. PLATING: Tin per MIL-T-10727, Type 1. APPLICATION 1. These parts are designed to provide an immersion resistant 2 wire stub splice, or a 2 to 1 parallel splice, made with having insulations rated for 135qC minimum. 2. Recovered dimensions of insulation sleeve (Item1): I.D.: .095 (2.4130) Max. Wall: .013 (0.3302) Min. 3. For installation procedures refer to Tyco Electronics/Raychem’s “Miniseal D-436 Series Sealed Crimp Splice Products Installation Guidelines.” 300 Constitution Dr Menlo Park, CA 94025, U.S.A. Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A REVISED BY: ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: Raychem Devices Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. ECO NUMBER: TITLE: STUB SPLICE SEALING SYSTEM DOCUMENT NO.: D-436-58/-59 REV: DATE: J SCALE: UNGUYEN 06090 ECO-10-022537 © 2004-2009 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. November 3, 2010 SIZE: NTS SHEET: A 1 of 1