FEATURES PETERMANN - HIGH RELIABILITY FOR LOW COST - TEMPERATURE STABILITY OF +-1 PPM AVAILABLE - EXCELLENT PHASE NOISE PERFORMANCE - LOW POWER CONSUMPTION - CHEAPEST AVAILABLE LEADED SMD-TCXO IN METAL PACKAGE - EXTENDED TEMPERATURE RANGE TO -40/+85°C AVAILABLE TECHNIK Time & Frequency Components M4511 SMD-PACKAGE 11.4 x 9.6 x 2.5 mm³ 10.0 ~ 51.84 MHz CLIPPED SINE WAVE VS. TEMPERATURE +-1 ~ +-5 ppm VS. SUPPLY VOLTAGE +-0.5 ppm max. / 5VDC +-5% FREQUENCY STABILITY VS. LOAD +-0.2 ppm max. / 10 pF ~ 20 pF VS. AGING +-1 ppm max. per year OPERATING TEMPERATURE RANGE -0/+50°C ~ -40/+85°C STORAGE TEMPERATURE RANGE -40/+85°C VOLTAGE +5.0 VDC +-5% INPUT CURRENT 3 mA max. SIGNAL CLIPPED SINE WAVE OUTPUT VOLTAGE 1.0 V peak to peak min. LOAD 10 kΩ / 10 pF STANDARD +-3 ppm min. per internal trimmer FREQUENCY ADJUSTMENT OPTION +-5 ppm min. by external control voltage EXTERNAL CONTROL VOLTAGE 2.5 VDC +-2 VDC 10 Hz offset from carrier -80 dBc/Hz 100 Hz offset from carrier -105 dBc/Hz PHASE NOISE (typical) 1 kHz offset from carrier -130 dBc/Hz 10 kHz offset from carrier -145 dBc/Hz 100 kHz offset from carrier -150 dBc/Hz PIN 1 NOT CONNECTED OR CONTROL VOLTAGE PIN 2 CASE GROUND PIN CONNECTION PIN 3 OUTPUT PIN 4 SUPPLY VOLTAGE OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION SERIES PACKAGE FREQUENCY RANGE PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components PART NUMBERING GUIDE EXAMPLE M4511-2.5-S-J-10-S-V-27.000MHz-T SERIES M4511 5 = 5 mm PACKAGE HEIGHT 2.5 = 2.5 mm PACKAGE HEIGHT S = CLIPPED SINE WAVE T = ON DEMAND H = ON DEMAND J = 0/+50°C N = -10/+60°C X = 0/+70°C M = -20/+70°C K = -30/+75°C W = -40/+85°C 10 = +-1.0 ppm 15 = +-1.5 ppm 20 = +-2.0 ppm 25 = +-2.5 ppm 50 = +-5.0 ppm X = OTHER VALUE - PLEASE INDICATE YOUR REQUIRED VALUE Blank = TCXO V = 2.5 +-2.0 VDC for +-5 ppm min. FREQUENCY IN MHz -T PACKAGE HEIGHT OUTPUT SIGNAL TEMPERATURE RANGE STABILITY VS. TEMPERATURE VCTCXO OPTION FREQUENCY TAPE AND REEL PACKAGE OUTLINE DRAWING M4511 #2 #4 #3 - #1 H H{ #3 8.35 2.0 1.5 #4 #2 #1 7.62 1.0 - 0.8 #1 MARK PIN #1 #2 #3 #4 H1 = 5.0max H2 = 2.5max Connection N.C. or Control Voltage Ground Output VDD Unit:mm PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components TEST CIRCUIT FOR CLIPPED SINE WAVE + mA M #4 + + VM - POWER SUPPLY CLIPPED SINE WAVE TEST POINT - 0,1µF #3 VDD OUT 10k OSCILLATOR CL=10pF GND #1 - CLIPPED SINE WAVE OUTPUT SIGNAL #2 0.0VDC VP-P 1V min N.C. or Control Voltage NOTE: CL includes probe and fixture capacitance TEST CIRCUIT FOR HCMOS (ON DEMAND) + mA M TEST POINT #4 + + VM - POWER SUPPLY #3 #1 - REFLOW SOLDER PROFILE VCC OUT OSCILLATOR 0,1µF GND CL=15pF #2 240°C NOTE: CL includes probe and fixture capacitance REFLOW 240°C max. 4°C/s max. 10s max. TEMPERATURE COOLING TEST CIRCUIT FOR TTL (ON DEMAND) 150°C 25°C + + POWER SUPPLY - mA M TEST POINT #4 + VM - TIME #3 VDD OUT OSCILLATOR 0,1µF GND #1 1 - 2 minutes RL =390 CL=15pF 1N4148 or Equiv #2 N.C. or Control Voltage NOTE: CL includes probe and fixture capacitance PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected]