Low Profile Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier MB1S - MB8S VOLTAGE - 50 TO 1000 VOLTS CURRENT - 0.5 AMPERES FEATURES Low profile space Ideal for automated placement Glass passivated chip junction Low forward voltage drop Low leakage current High forward surge capability High temperature soldering： 260℃/10 seconds at terminals • Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC • • • • • • • SOIC-4 Polarity symbols molded or marking on body 4 3 1 : 2 : –– 3 : + ~ ~ 0.106(2.7) 0.09(2.3) + 0.008(0.2) 4 : –– ~ ~ 1 0.275(7)MAX 2 0.067(1.7) 0.057(1.3) MECHANICAL DATA Case: MBF Molded plastic over glass passivated chip • Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D • Polarit : Polarit symbols marked on 0.165(4.2) 0.150(3.8) 0.067(1.7) 0.057(1.3) C0.02(0.5) 0.051(1.3) 0.035(0.9) 0.031(0.8) 0.0191(0.5) • 0.106(2.7) 0.09(2.3) 0.193(4.9) 0.177(4.5) 0.014(0.35) 0.006(0.15) 0.043(1.1) 0.027(0.7) Dimensions are in: inches (mm) 0.5 Ampere Glass Passivated Bridge Rectifiers Absolute Maximum Ratings* Symbol IO TA = 25°C unless otherwise noted Parameter Value Units 0.5 A 35 A 1.4 11 85 W mW/°C °C/W RqJA Average Rectified Current @ TA = 50°C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient,** per leg RqJL Thermal Resistance, Junction to Lead,** per leg 20 °C/W Tstg Storage Tem perature Range -55 to +150 °C TJ Operating Junction Tem perature -55 to +150 °C if(surge) PD *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.5-0.5" (13x13 mm) lead length. Electrical Characteristics TA = 25°C unless otherwise noted Parameter Device Units 1S 2S 4S 6S 8S Peak Repetitive Reverse Voltage 100 200 400 600 800 V Maximum RMS Bridge Input Voltage 70 140 280 420 560 V DC Reverse Voltage (Rated VR) Maximum Reverse Leakage, per leg @ rated VR TA = 25°C TA = 125°C Maximum Forward Voltage Drop, per bridge @ 0.5 A 2 I t rating for fusing t < 8.3 ms 100 200 400 600 800 V Typi cal Junction Capacitance, per leg VR = 4.0 V, f = 1.0 MHz 0.118(3.0) MAX 5.0 0.5 mA mA 1.0 5.0 V 2 At 13 pF Web Site: WWW.PS-PFS.COM Typical Characteristics Forward Current Derating Curve Forward Characteristics 10 FORWARD CURRENT (A) FORWARD CURRENT (A) 1 0.75 0.5 0.25 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE ( º C) 1 0.1 0.01 0.4 175 0.8 1 1.2 FORWARD VOLTAGE (V) 1.4 10 30 25 20 15 10 5 0 0.6 Reverse Characteristics 35 REVERSE CURRENT ( µ A) PEAK FORWARD SURGE CURRENT (A) Non-Repetitive Surge Current TA = 25º C Pulse Width = 300µs 2% Duty Cycle 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 T C = 100 º C 1 0.1 TA = 25 º C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Web Site: WWW.PS-PFS.COM