Pomona ® Model 5517A Replacement Test Lead For Simpson Reverse Lead Set DMM’s FEATURES: • Designed for older Simpson meters with a reverse lead set such as Simpson Models 260-7/-8. • Probe body incorporates a two step mold process. First step is Polypropylene for probe rigidity. Second step is Santoprene rubber for handling comfort, added insulation protection and wire strain relief. • Probe test leads are designed with over-voltage spike protection of up to 6kV. • Probe body and banana jack are molded directly to the wire for robust pull strength. • Wire is a high strand count silicone wire for extreme flexibility and high temperature resistance. MATERIALS: Probe Body: Santoprene Rubber (Color: Gray) Over Polypropylene: Fire Retardant (Color: One Black, One Red) Tip: Brass, Nickel Plated Wire: 18 AWG, 65 x 36 Tinned Copper Strand, Silicone Insulation, O.D. .144” (3,66 mm) Banana Jack: Body – Brass, Nickel Plated Insulation – PVC, Color: One Black, One Red RATINGS: Operating Voltage: 1000 VRMS/DC Current: 10 Amperes ORDERING INFORMATION: Model 5517A Includes a set of one black and one red test probes. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet\d5517A_1_01.doc PomonaACCESS 90509 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1