NKK MB2061SB3W07

Miniature Pushbuttons
Series MB2000
Distinctive Characteristics
Guide interlocked with actuator block prevents window locking and
maintains correct plunger alignment to assure contact stability.
Employs an over-center actuator mechanism, which diminishes
sparking and increases operating life in AC circuits.
High torque bushing construction prevents rotation
or separation from frame during installation.
Splashproof option (D3 and B3 bushing codes) features an
o-ring within the bushing and one under the face nut
to protect from splashed, sprayed, or spilled liquids.
High insulating barriers, formed in the molded
diallyl phthalate case, increase isolation of circuits
in multipole devices.
Prominent external insulating barriers increase
insulation resistance and dielectric strength.
Epoxy sealed terminals prevent entry of solder
flux and other contaminants.
Clinching of the frame to the case well above the base
and terminals provides 1,500V dielectric strength.
Actual Size
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Miniature Pushbuttons
Series MB2000
General Specifications
Electrical Capacity (Resistive Load)
Power Level (code W):
Logic Level (code G):
Logic/Power Level (code A):
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Contact Timing:
Plunger Travel:
Pretravel:
Overtravel:
Total Travel
Materials & Finishes
Plunger:
Frame:
Movable Contactor:
Movable Contacts:
Stationary Contacts:
Terminals:
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
Sealing:
Installation
Mounting Torque:
Cap Installation Force:
Soldering Time & Temp:
Process Seal:
Standards & Certifications
Flammability Standards:
UL & C-UL Recognized:
R
CSA Certified:
6A @ 125V AC & 3A @ 250V AC or 3A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Combines W & G ratings
Note: Find additional explanation dual rating & operating range in Supplement section.
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
50,000 operations minimum for splashproof models; 100,000 for all other models
25,000 operations minimum for silver; 50,000 operations minimum for gold
50,000 operations minimum for silver at 3A @ 125V AC
Momentary Action: 1-pole 9.32N; 2-pole 16.18N; 4-pole 25.54N;
Alternate Action: 1-pole 4.41N; 2-pole 7.06N; 4-pole 11.77N
Slow make, slow break
Screw-on Cap (Mom.)
Screw-on Cap (Alt.)
Snap-on Cap (Mom. & Alt.)
.028” (0.71mm)
.110” (2.80mm)
.125” (3.19mm)
.043” (1.09mm)
.043” (1.10mm)
.050” (1.26mm)
.071” (1.80mm)
.153” (3.90mm)
.175” (4.45mm)
Brass w/nickel plating; polyacetal w/B1 bushing
Bushing:
Brass with nickel plating
Stainless steel
Case:
Diallyl phthalate resin (UL94V-0)
Phosphor bronze with silver or gold plating
Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A)
Silver with silver plating (code W); copper or brass with gold plating (code G); or
silver with gold plating (code A)
Copper or brass with silver plating; copper or brass with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
B3 & D3 bushing options equivalent to IP67
1.5Nm (13.0 lb • in) for double nut; .7Nm (6.0 lb • in) for single nut
80.0N (18.0 lbf) maximum downward force on actuator
Wave Soldering (PC version): See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
These devices are not process sealed. Hand clean locally using alcohol based solution.
UL94V-0 case
All models recognized at 6A @ 125V AC or 3A @ 250V AC or 0.4VA max. @ 28V DC max;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch
All models certified at 6A @ 125V AC or 3A @ 250V AC or 0.4VA max. @ 28V max;
CSA File No. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Large Bushing Miniature Pushbuttons
Series MB2000
TYPICAL SWITCH ORDERING EXAMPLE
MB
S
2011
B1
POLES & CIRCUITS
2011
SPDT
ON
SPDT
ON
ON
2061
DPDT
ON
(ON)
2085
DPDT
ON
ON
2181
4PDT
ON
(ON)
2185
4PDT
ON
ON
01
CONTACT MATERIALS
& RATINGS
(ON)
2065
W
W
G
Silver
Rated 6A @ 125V AC
& 3A @ 250V AC
Gold
Rated 0.4VA max @
28V AC/DC max
( ) = Momentary
PLUNGER TYPE
Plunger for Screw-on Caps
BUSHINGS
B1
.472” (12.0mm)
Threaded with Keyway
B3
.472” (12.0mm)
Threaded w/Splashproof
A
CAPS
B
.315” (8.0mm) Dia.
C
.394” (10.0mm) Dia.
D
.520” (13.2mm) Dia.
E
.748” (19.0mm) Dia.
CAP COLORS
TERMINALS
S
D
01
Solder Lug
02
Quick Connect
03
.250” (6.35mm) Straight PC
05
.425” (10.8mm) Wirewrap
06
.750” (19.05mm) Wirewrap
07
.964” (24.5mm) Wirewrap
08
1.062” (27.0mm) Wirewrap
A
Black
B
White
C
Red
*D
Amber
*E
Yellow
F
*G
Green
*H
Gray
Blue
* Not available
with cap code E
IMPORTANT:
Switches are supplied without UL, C-UL, & CSA
markings unless specified. Specific models &
ratings noted on General Specifications page.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
MB2011SB1W01-DA
Black .520” (13.2mm) Diameter Cap
Plunger for Screw-on Caps
.472” (12.0mm) Diameter
Threaded Bushing with Keyway
Silver Contacts with
6-Amp Rating
SPDT ON-(ON) Circuit
Solder Lug Terminals
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Large Bushing Miniature Pushbuttons
Series MB2000
POLES & CIRCUITS
Plunger Position
( ) = Momentary
Normal
Pole
SP
DP
4P
Model
Connected Terminals
Down
Normal
Keyway
Throw & Switch Schematics
Down
Note: Terminal numbers are
not actually on the switch.
Keyway
MB2011
ON
(ON)
MB2065
ON
ON
MB2061
ON
(ON)
MB2085
ON
ON
MB2181
ON
(ON)
MB2185
ON
ON
2-3
2-1
2 (COM)
SPDT
3
2-3 5-6
2-1 5-4
2
DPDT
1
3
2-3 5-6
8-9 11-12
2-1 5-4
8-7 11-10
4PDT
1
5
2
3
1
6
5
(COM)
6
(COM)
4
4
11
8
9
7
12
10
PLUNGER TYPE
S
(6.7) Dia
.264
(6.4) Dia
.252
Plunger for
Screw-on Caps
Plunger is plastic
for B1 bushing.
(5.3)
.208
On alternate action models, after
transferring circuit, the plunger
returns to its original position,
and does not latch down.
(5.3)
.208
Plunger is metal for
B3 bushing.
BUSHINGS
B1
.472” (12.0mm) Diameter
Threaded with Keyway
.472” (12.0mm) Diameter
Threaded Splashproof
B3
M12P1
Maximum Panel
Thickness with
Standard Hardware:
.217” (5.5mm)
(1.85)
.073
Maximum Panel
Thickness with
Standard Hardware:
.217” (5.5mm)
M12P1
(1.1)
.043
(5.0)
.197
(12.0)
.472
(2.0)
.079
(4.9)
.193
(18.0) Dia
.709
(12.0)
.472
Panel Cutouts
(12.5) Dia
.492
For B1 Bushing
with Keyway
For B1 Bushing
with Optional
Locking Ring
(11.5)
.453
(1.5)
.060
(12.5) Dia
.492
For B3 Bushing
without Keyway
(9.0)
.354
(12.5) Dia
.492
(3.0) Dia
.118
CONTACT MATERIALS & RATINGS
W
Silver over Silver
Power Level
6A @ 125V AC & 3A @ 250V AC
G
Gold over Brass or Copper
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Note: Complete explanation of operating range in Supplement section.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series MB2000
Large Bushing Miniature Pushbuttons
TERMINALS
01
Solder Lug
.062” (1.57mm) Wide
Quick Connect
02
(4.0)
.157
Epoxy Seal
(6.35)
.250
Epoxy Seal
(2.0)
.079
(2.0)
(1.1) .079
.043
Thk = (0.8)
.031
(1.57)
.062
Thk = (0.8)
.031
.250” (6.35mm)
Straight PC
03
(4.8)
.189
3
2
(6.35)
(4.8) .250
.189
Epoxy Seal
(4.7) Typ
.185
1
(1.8) Dia Typ
.073
(1.17)
.046
Thk = (0.8)
.031
.425” (10.8mm)
Wirewrap or Extended PC
06
.750” (19.05mm)
Wirewrap or Extended PC
07
.964” (24.5mm)
Wirewrap or Extended PC
08
1.062” (27.0mm)
Wirewrap or Extended PC
6
2
5
1
4
(4.7) Typ
.185
3
6
9
12
2
5
8
11
1
4
7
10
(4.8) Typ
.189
Double Pole
Epoxy Seal
A
(1.27)
.050
Thk = (0.8)
.031
(4.7) Typ
.185
(1.8) Dia Typ
.073
(1.8) Dia Typ
.073
Single Pole
05
3
Four Pole
If using as extended PC terminal, refer to the above footprints.
Dimension A = terminal lengths as shown beside the terminal
codes at the left.
CAPS & CAP COLORS
B
AT078
.315” (8.0mm) Dia.
Screw-on Cap
C
AT079
.394” (10.0mm) Dia.
Screw-on Cap
D
AT414
.520” (13.2mm) Dia.
Screw-on Cap
E
AT412
.748” (19.0mm) Dia.
Screw-on Cap
Material:
Polystyrene
Finish:
Glossy
Material:
Polystyrene
Finish:
Glossy
Material:
PBT
Finish:
Glossy
Material:
Polystyrene
Finish:
Glossy
Colors Available:
ABCEFGH
Colors Available:
ABCEFGH
Colors Available:
ABCDEFGH
Colors Available:
ABCF
(6.5)
.256
(11.79)
.464
Cap Color
Codes:
A
(13.2) Dia
.520
(10.0) Dia
.394
(8.0) Dia
.315
Black
(8.0)
.315
(13.28)
.523
B
White
C
Red
(11.0)
.433
(15.0)
.590
D
Amber
E
(19.0) Dia
.748
Yellow
F
(8.0)
.315
(12.0)
.472
Green
G
Blue
H
NKK Switches • email: sales[email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
Gray
03-07
Large Bushing Miniature Pushbuttons
Series MB2000
TYPICAL SWITCH DIMENSIONS
Solder Lug
Single Pole
Keyway
M12P1
(1.1) x (2.0) Dia Typ
.043 x .079
(0.8) Typ
.031
3
(13.2) Dia
.520
(4.7) Typ
.185
(4.0)
.157
(15.0)
.590
(12.0)
.472
1
(0.5)
.020
(13.0)
.512
(7.9)
.311
(13.0)
.512
2
COM
(4.5)
.177
(17.5)
.689
(2.0)
.079
MB2011SB1W01-DA
Solder Lug
Double Pole
Keyway
M12P1
(1.1) x (2.0) Dia Typ
.043 x .079
(13.2) Dia
.520
COM
(4.7) Typ
.185
(4.0)
.157
(15.0)
.590
(12.0)
.472
6
3
5
2
4
1
(13.0)
.512
(0.5)
.020
(13.0)
.512
(12.7)
.500
(0.8) Typ
.031
(2.0) Typ
.079
(4.5)
.177
(4.8)
.189
(17.5)
.689
MB2061SB1W01-DA
Solder Lug
Four Pole
Keyway
M12P1
(1.1) x (2.0) Dia Typ
.043 x .079
(13.2) Dia
.520
COM
(4.7) Typ
.185
(13.0)
.512
(15.0)
.590
(12.0)
.472
12
9
6
3
11
8
5
2
10
7
4
1
(13.0)
.512
(0.5)
.020
(4.0)
.157
(22.3)
.878
(0.8) Typ
.031
(17.5)
.689
(2.0) Typ
.079
(4.5)
.177
(4.8) Typ
.189
MB2181SB1W01-DA
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Large Bushing Miniature Pushbuttons
Series MB2000
HARDWARE
Standard Hardware for B1 Bushing
AT503M
Hex Face Nut
AT508
Lockwasher
AT527M
Hex Nut
AT506M
Locking Ring
Material:
Brass with Chrome plating
Material:
Steel with Zinc/Chromate
Material:
Steel with Nickel plating
Material:
Steel with Zinc/Chromate
(12.1) Dia
.476
(12.1)
.476
M12 P1
(14.0)
.551
M12 P1
(15.8) Dia
.622
(14.0)
.551
(18.2) Dia
.717
(2.8)
.110
(13.8) Dia
.543
(16.0)
.630
(2.4)
.094
(11.5)
.453
(0.5)
.020
(1.0)
.039
(16.0)
.630
(2.0)
.079
(2.8)
.110
(9.5)
.374
(1.0)
.039
Standard Hardware for B3 Bushing
AT503M
Hex Face Nut
AT401P
O-ring
M12 P1
Material:
Brass with Chrome plating
Material:
Natural rubber
(14.0)
.551
(16.0)
.630
(12.1) Dia
.476
(17.5) Dia
.689
(2.4)
.094
(1.5)
.059
Optional Splashproof Boot for B1 Bushing
AT4043
Splashproof Boot
(18.0) Dia
.709
(12.6) Dia
.496
(9.6) Dia
.378
Material: Silicone Rubber
Operating Life: 10,000 for momentary
30,000 for alternate action
When using a splashproof boot, no cap is required.
(10.7)
.421
(9.0)
.354
M12 P1
(4.0) Max
.157
(3.5) Min
.138
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Large Bushing Miniature Pushbuttons
Series MB2000
CUSTOM ASSEMBLY ORDERING EXAMPLE
The MB2000 pushbutton series offers flexibility to accommodate a variety of applications. Using a basic
large bushing model, different accessories can be assembled onto the switch to achieve the mounting variations shown on the following two pages.
These switches have:
• 12mm diameter threaded bushing with keyway
• Silver contacts
• 6-Amp rating
• Solder lug terminals
Other 12mm bushing options can be used; see details in preceding Large Bushing Ordering tables.
SB1W01
MB2011
POLES & CIRCUITS
4
C
CAP COLORS
FOR SHROUD
A
2011
SPDT
ON
(ON)
MOUNTER SHAPES
FOR SHROUD
2065
SPDT
ON
ON
4
Round
A
Black
A
Black
2061
DPDT
ON
(ON)
5
Rectangular
B
White
B
White
2085
DPDT
ON
ON
C
Red
H
Gray
4-pole available
for shroud types 4 & 5
F
Green
G
Blue
( ) = Momentary
H
Gray
See custom assemblies on
following pages.
Round Shroud
MB2011SB1W01-4C-A
MOUNTER SHAPE
FOR SNAP-IN
6
CAP COLORS
FOR SNAP-IN
Round (for 1- and
2-pole only)
Rectangular Shroud
MB2011SB1W01-5C-A
A
Black
B
White
C
Red
F
Green
MOUNTER COLORS
FOR SHROUD
MOUNTER COLOR
FOR SNAP-IN
A
Black
Snap-in Mounter
MB2011SB1W01-6C-A
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Large Bushing Miniature Pushbuttons
Series MB2000
MOUNTER SHAPES FOR SHROUDS
4
5
AT455 Round
AT453 Rectangular
Material: Polycarbonate
Material: Polycarbonate
Colors: A B H
Colors: A B H
CAPS & CAP COLORS FOR SHROUDS
AT454 Round
Insert Cap
AT452 Rectangular
Insert Cap
Material: Polycarbonate
Material: Polycarbonate
Colors: A B C F G H
Colors: A B C F G H
AT080 Screw Adaptor for Insert Caps
Material: Brass
MOUNTER SHAPE FOR SNAP-IN
6
AT528 Round
Material: Glass fiber reinforced polyamide
Color: A
CAP & CAP COLORS FOR SNAP-IN MOUNTER
AT412 Screw-on Cap
Material: Polystyrene
Colors: A B C F
Color Codes:
A
Black
B
White
C
Red
F
Green
G
Blue
H
Gray
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Large Bushing Miniature Pushbuttons
Series MB2000
CUSTOM ASSEMBLY WITH ROUND SHROUD
(1.1) x (2.0) Typ
.043 x .079
Keyway
M12P1
(0.8) Typ
.031
(17.7) Dia
.697
(18.4) Dia
.724
(22.0) Dia
.866
(24.0) Dia
.945
(4.7) Typ
.185
(0.5)
.020
(4.5)
.177
(13.0)
.512
(27.5)
1.083
(2.0)
.079
(14.0)
.551
MB2011SB1W01-4C-A
Single Pole
Double Pole
(12.5) Dia
.492
3
COM
2
(13.0)
.512
COM
1
6
3
5
2
4
1
(11.5)
.453
(13.0)
.512
(1.5)
.060
(2.0) Typ
.079
Effective Panel Thickness:
.217” (5.5mm) maximum
(4.8)
.189
(2.0)
.079
(7.9)
.311
(12.7)
.500
CUSTOM ASSEMBLY WITH RECTANGULAR SHROUD
(1.1) x (2.0) Typ
.043 x .079
Keyway
M12P1
(24.6)
.969
(20.1)
.791
(26.2)
1.031
(19.4)
.764
(16.1)
.634
(20.6)
.811
Single Pole
(14.0)
.551
2
(13.0)
.512
1
(0.5)
.020
(4.5)
.177
(13.0)
.512
(27.5)
1.083
Double Pole
3
COM
(4.7) Typ
.185
(2.0)
.079
(21.0)
.827
MB2011SB1W01-5C-A
(0.8) Typ
.031
COM
6
3
5
2
4
1
(12.5) Dia
.492
(11.5)
.453
(13.0)
.512
(1.5)
.060
(2.0) Typ
.079
(4.8)
.189
(2.0)
.079
(7.9)
.311
(12.7)
.500
Effective Panel Thickness:
.217” (5.5mm) maximum
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series MB2000
Large Bushing Miniature Pushbuttons
CUSTOM ASSEMBLY WITH SNAP-IN MOUNTER
Guide
(0.8) Typ
.031
(1.1) x (2.0) Typ
.043 x .079
(4.7) Typ
.185
(0.5)
.020
(1.6)
.063
(19.0) Dia
.748
(0.76)
.030
(25.8) Dia
1.016
(4.5)
.177
(18.5)
.728
(4.8)
.189
(17.5)
.689
MB2011SB1W01-6C-A
(1.0) R
.039
(12.4)
.488
Single Pole
Double Pole
(23.0) Dia
.906
(23.0) Dia
.906
3
COM
(13.0)
.512
2
1
COM
6
3
5
2
4
1
(13.0)
.512
(23.3) Dia
.917
(2.0)
.079
Panel Thickness Range:
.039” ~ .157” (1.0 ~ 4.0mm)
(7.9)
.311
(12.7)
.500
(2.0) Typ
.079
(4.8)
.189
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07