PROTEC EM8D

05223
EM8D-100L
Only One Name Means ProTek’Tion™
emi filter/tvs array
Description
The EM8D-100L is a DFN-16, 8 line low pass filter array with integrated TVS diodes. The EM8D-100L is designed to
suppress unwanted EMI/RFI signals and provide ESD protection for high-speed data interfaces such as LCD displays
and camera imagers for SMART phones.
With a desired cutoff frequency of 150MHz, the EM8D-100L provides good EMI/RFI attenuation better than 35dB in
the 800MHz - 3GHz bandwidth. This blocks RF noises from GSM, DCS or Bluetooth which can affect the baseband
chipset and other blocks. Coupled with the integrated TVS diodes, this device is able to meet IEC 61000-4-2 (ESD)
and 61000-4-4 (EFT) immunity requirements.
DFN-16 package
Features
applications
• Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns
• ESD Protection > 25 kilovolts
• EMI Filtering/TVS Low Pass Filters
• >25dB Attenuation from 800MHz to 3GHz
• Protects up to 8 Data Lines
• RoHS Compliant
• REACH Compliant
• SMART Phones
• LCD Display Panel
• Portable Electronics
• SMART Cards
Mechanical characteristics
• Molded JEDEC DFN-16 Package
• Approximate Weight: 7 milligrams
• Lead-Free Pure-Tin Plating (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• 12mm Tape and Reel Per EIA Standard 481
• Flammability Rating UL 94V-0
circuit diagram & PIN CONFIGURATION
1
For Each Line
I/O
2
3
4
5
6
7
8
13
12
11
BOTTOM VIEW
10
9
100 Ohm
I/O
10pF
GND
10pF
GND
16
I/O connected from pins 1-16, 2-15, 3-14,
5-12, 6-11, 7-10 and 8-9.
05223.R5 4/11
Page 1
15
14
www.protekdevices.com
05223
EM8D-100L
Only One Name Means ProTek’Tion™
typical device characteristics
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
Operating Temperature
SYMBOL
VALUE
UNITS
TA
-40 to 85
°C
Storage Temperature
TSTG
-55 to 150
°C
DC Power per Resistor
P
100
mW
Typical Resistance for 10 seconds
R
100
OHMs
Soldering Temperature for 10 seconds
TL
265
°C
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
EM8D-100L
device
marking
M8D10L
RATED
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
MAXIMUM
reverse
LEAKAGE
CURRENT
typical
forward
voltage
MINIMUM
cut-off
TYPICAL
ATTENUATION frequency CAPACITANCE
(50 ohms i/o)
(Note 1)
zero bias
VWM
VOLTS
@ 1mA
V(BR)
VOLTS
@ 3V
ID
µA
@ 10mA
VF
VOLTS
@
800-3000 MHz
dB
fC
MHz
@2.5V, 1MHz
C
pF
5.0
6.0
0.1
0.8
25
150
20
NoteS
1. ± 20% tolerance.
05223.R5 4/11
Page 2
www.protekdevices.com
05223
EM8D-100L
Only One Name Means ProTek’Tion™
typical device characteristics
figure 1
insertion loss
-5
2.5 Volts
-15
Gain - dB
0 Volts
-25
-35
0.1
1
1000
100000
figure 2
resistance vs temperature
(Normalized to Resistance at 25°C)
1.10
Normalized Resistance
10
100
Frequency - MHz
1.06
1.02
0.98
0.94
0.90
-40
05223.R5 4/11
-20
0
20
40
Temperature - °C
Page 3
60
80
100
www.protekdevices.com
05223
EM8D-100L
Only One Name Means ProTek’Tion™
typical device characteristics
figure 3
capacitance vs reverse voltage
(Normalized to Capacitance at 2.5V DC @ 25°C)
Cj - Capactiance(Normalized) - pF
1.6
1.2
0.8
0.4
0
0
2
4
VR - Reverse Voltage - Volts
6
figure 4
overshoot & clamping voltage (Through the Filter)
5 Volts per Division
35
25
15
5
-5
ESD Test Pulse - 15 kilovolt, 1/30ns (Waveshape)
05223.R5 4/11
Page 4
www.protekdevices.com
05223
EM8D-100L
Only One Name Means ProTek’Tion™
DFN-16 package information
P1
outline dimensions
dim
millimeters
inches
min
max
min
max
P1
3.90
4.10
0.154
0.161
P2
1.50
1.70
0.059
0.067
P3
0.74
0.84
0.029
0.033
L1
0.21
0.28
0.008
0.011
L2
0.23
0.30
0.009
0.012
L3
0.178
0.228
0.007
0.009
p
0.50 BSC
P2
Pin 1 Reference
TOP VIEW
END VIEW
L3
0.020 BSC
G1
2.90
3.10
0.114
0.122
G2
0.40
0.50
0.016
0.020
G3
0.15
0.25
0.006
0.010
G4
0.25
0.35
0.010
0.014
A1
0.00
0.05
0.00
0.002
K
0.33
0.40
0.013
0.016
NOTEs
SIDE VIEW
L2
A1
p
L1
1
8
G2
K
10
1. Controlling dimension: millimeters.
2. Dimensioning and tolerances per ANSI Y14.M, 1985.
3. Dimension L1 applies to terminal and is measured between 0.25 and
0.30mm from terminal.
4. Coplanarity applies to the exposed pad as well as the terminals.
G3
9
G4
G1
BOTTOM VIEW
pad layout dimensions
dim
millimeters
max
min
max
A
1.86
1.96
0.073
0.077
B
3.10
3.30
0.122
0.130
C
0.46
0.56
0.018
0.022
D
0.50 BSC
C
E
inches
min
P3
F
A
0.020 BSC
E
0.23
0.33
0.009
0.013
F
0.20
0.30
0.008
0.012
D
B
NOTES
1. Controlling dimension: millimeters.
05223.R5 4/11
Page 5
www.protekdevices.com
05223
EM8D-100L
Only One Name Means ProTek’Tion™
TAPE AND REEL
D
t
Top Cover
Tape
P2
Pin 1
10 Pitches Cumulative
Tolerance on tape ± 0.2
E
P0
A0
K0
F
W
B0
P
User Direction of Feed
specifications
Reel Dia.
Tape
Width
178mm (7”)
12mm
A0
B0
K0
D
E
F
1.90 ± 0.10 4.30 ± 0.10 0.80 ± 0.10 1.50 ± 0.10 1.75 ± 0.10
5.50
W
P0
P2
P
tmax
12.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.30 ± 0.05
Notes
1.
2.
3.
4.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape.
Marking on Part - marking code (see page 2).
Package outline, pad layout and tape specifications per document number 06056.R3 3/11.
ORDERING INFORMATION
base PART NUMBER
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE qty
EM8D-100L
-LF
-T73
3,000
7”
n/a
05223.R5 4/11
Page 6
www.protekdevices.com
05223
EM8D-100L
Only One Name Means ProTek’Tion™
company information
COMPANY PROFILE
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for
the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
application specific protection solutions for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
Web
www.protekdevices.com
www.protekanalog.com
COPYRIGHT © ProTek Devices 2005 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05223.R5 4/11
Page 7
www.protekdevices.com