05239 PLW0501H Only One Name Means ProTek’Tion™ STANDARD CAPACITANCE TVS COMPONENT APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Personal Digital Assistant (PDA) ✔ USB Interfaces IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns SC-79 FEATURES ✔ 250 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Cable Discharge Event (CDE) Protection ✔ ESD Protection > 25 kilovolts ✔ Unidirectional Configuration ✔ Protects One Unidirectional Line ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ Molded EIAJ SC-79 ✔ Weight 2 milligrams (Approximate) ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Device Marking: Marking Code & Polarity Band PIN CONFIGURATION 1 2 05239.R1 6/05 1 www.protekdevices.com PLW0501H DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 250 Watts Peak Pulse Current (tp = 8/20µs) IPP 16 A Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C TL 265°C °C PARAMETER Storage Temperature Soldering Temperature for 10 seconds ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER PLW0501H DEVICE MARKING CODE U5 RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE TYPICAL FORWARD VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE VWM VOLTS @ 1mA V(BR) VOLTS @100mA VF VOLTS @IP = 5A VC VOLTS @IP = 16A VC VOLTS @VWM ID µA @0V, 1MHz C pF 5.0 6.0 0.8 9.8 12.5 5 120 FIGURE 1 PEAK PULSE POWER VS PULSE TIME 120 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 10,000 1,000 250W, 8/20µs Waveform 100 10 0.01 05239.R1 6/05 FIGURE 2 PULSE WAVE FORM tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 1 10 100 td - Pulse Duration - µs 1,000 10,000 2 0 5 10 15 t - Time - µs 20 25 30 www.protekdevices.com PLW0501H PACKAGE OUTLINE & DIMENSIONS SC79 PACKAGE PACKAGE OUTLINE C A B PACKAGE DIMENSIONS F INCHES MIN MAX MIN MAX A B C D E F 0.043 0.049 0.035 0.066 0.028 0.008 1.10 1.30 0.70 1.50 0.50 0.08 0.90 1.70 0.70 0.20 D E MOUNTING PAD MILLIMETERS DIM 0.028 0.059 0.020 0.003 0.012 BSE 0.30 BSE NOTES 0.075 (1.90mm) 1. Controlling Dimensions in Millimeters. 2. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL ORDERING NOMENCLATURE 0.020 (0.50mm) 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PLW0501H-T73. 2. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., PLW0501H-T13. 4. Suffix-LF = Lead-Free, Pure Tin Plating,i.e., PLW0501H-LF-T73. 0.015 (0.38mm) Outline & Dimensions: Rev 2- 9/05, 06037 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 1.00 ± 0.10 1.95 ± 0.05 0.75 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t 0.25 10 Pitches Cumulative Tolerance on Tape. ± 0.2 P2 D tmax E Top cover tape Empty Pocket Pin 1 Indicated by Band A0 F W K0 B0 P User Direction of Feed COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05239.R1 6/05 3 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com