VT2-802F SMD VC-TCXO Clipped sine wave Features Applications: mobile communications, GPS, instrumentation, microwave Frequency range up to 50 MHz Tight frequency stability vs. temperature Low phase noise Specification Parameter VT2-802FL Frequency range Standard frequencies Frequency stability: vs. temperature vs. supply & load change vs. aging Frequency tolerance ex. factory Supply voltage Supply current Output signal Output load Frequency pulling range Voltage control Frequency adjustment Phase noise @ 13.0 MHz carrier frequency Operating temperature range VT2-802FM VT2-802FS 9.6 ~ 50 MHz 10.00, 13.00, 16.384, 19.20, 19.44, 20.00, 20.48 & 27.00 MHz ≤ ±1.0 ~ ± 2.5 ppm ≤ ±0.2 ppm ±5 % st ≤ ±1.0 ppm 1 year ≤ ±0.5 ppm @ +25 °C +3.0 V ±5 % +3.3 V ±5 % +5.0 V ±5 % 1.5 ~ 4 mA > 0.8 Vp-p clipped sine wave 10 kΩ // 10 pF ±10 ~ ±15 ppm +1.65 V ±1.35 V +2.5 V ±2.0 V > ± 3 ppm by internal trimmer -140 dBc/Hz @ 1 kHz -30 ~ +75 °C commercial application -40 ~ +85 °C industrial application -55 ~ +125 °C tape & reel 500 or 1’000 pieces Storage temperature range Packaging units Customer specifications on request Pin function #1 #2 #3 #4 #5 #6 Example for solder pattern GND GND Output GND Vc Voltage control Vcc Do not design any conductive path between the pattern Example for IR reflow soldering temperature 2002/95/EC RoHS compliant QuartzCom AG [email protected] www.quartzcom.com QuartzCom Asia [email protected] QuartzCom USA [email protected] 02 May. 10