NETWORK RESISTORS RA Series: SIP Network DIMENSIONS INTRODUCTION Series RA, single in-line-pin, resistor networks offer semi-precision performance for commercial applications. Automated production assures competitive pricing and uniform quality. A heavy conformal coating protects the resistive element from moisture contamination. FEATURES •Low profile, high stability •Rugged construction •Dual Termination available Derating Curve 70°C 100 RA12 Rated Power of Element (W) 0.125 Max. Working Voltage (V) Max. Overload Voltage (V) 200 280 Resistance Resistance Range Tolerance ( ) 1~10M F(±1%) G(±2%) J(±5%) Rated Load (%) SPECIFICATIONS TYPE 80 60 40 20 0 -55 -30 0 20 40 60 80 100 125 140 160 Ambient Temperature (°C) STANDARD CIRCUITS Call for special circuit requirements. TYPICAL PERFORMANCE Test Items Spec. Conditions JIS-C-5202 MIL-R-83401 Operating Temp. -55 ~ +125°C Resistance Temp. Coef ±200ppm/°C 5.2(B) 6.4.8 Short Time Overload ±1.0% 5.5 4.6.10 Temperature Cycle ±0.5% 7.4(-55°C/+125°C) 4.6.3 Load Life ±2.0% 7.10(1,000HR) 4.6.18(70°C 1000HR) Moisture-Proof Load Life ±2.0% 7.90(1,000HR) Moisture Resistance ±1.0% 4.6.15 High Temp. Exposure ±1.0% 4.6.19 Solderability 95% Coverage Min. 6.5(230°C/5S) 4.6.6 Solder Pot ±0.5% 6.4(260°C/10S) 4.6.14 RATED POWER At 1/8 Watt per element power rating AMBIENT TEMPERATURE: 70°C # of Elements Rated Power 4 pin 0.4W 5 pin 0.5W 6 pin 0.63W 7 pin 0.75W 8 pin 0.85W 9 pin 1.0W 10 pin 1.05W PART NUMBER EXAMPLE RA 12 - 08 X - 10K - J Series Wattage per Element Number of Pins Circuit Type Resistance Per Element Tolerance RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C2CB01 REV 2002.02.07