SF1086A • • • • • • Designed for GSM BTS Transmitter IF Applications Low Insertion Loss Excellent Size-to-Performance Ratio Hermetic 13.3 x 6.5 mm Surface-Mount Case Unbalanced Input and Output Pb Complies with Directive 2002/95/EC (RoHS) 125 MHz SAW Filter Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC -40 to +85 °C Storage Temperature Range Suitable for lead-free soldering - Max. Soldering Profile 260°C for 30 s SM13365-12 Electrical Characteristics Characteristic Nominal Center Frequency Passband Sym fC Insertion Loss at fc 1 dB Passband Notes 1 Min Typ 125.000 Max Units MHz 6 8.0 dB 1, 2 ±150 ±205 IL BW1 Amplitude Ripple over fc±150 kHz Group Delay Variation over fc ±150 kHz Absolute Group Delay Rejection GDV 0.7 GD 1, 2, 3 fc-0.6 to fc-0.4 and fc+0.4 to fc+0.6 MHz 1.25 kHz <100 150 nsP-P 1.2 1.7 fc-1.2 to fc-0.6 and fc+0.6 to fc+1.2 MHz 8 fc-1.8 to fc-1.2 and fc+1.2 to fc+1.8 MHz 20 23 fc-3.4 to fc-1.8 and fc+1.8 to fc+3.4 MHz 25 37 fc-9.5 to fc-3.4 and fc+3.4 to fc+9.5 MHz 30 47 fc-13 to fc-9.5 and fc+9.5 to fc+13 MHz 43 65 DC to fc-13 and fc+13 to 450 MHz 55 >60 50 Except Spurious Rejection near 1.6, 1.8, and 2.0 x fc Operating Temperature Range µs dB 2 TA 1 Impedance Matching to 50 Ω unbalanced Case Style °C External L-C SM13365-12 13.3 x 6.5 mm Nominal Footprint Lid Symbolization (YY = year, WW = week) Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 W and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. +85 -10 RFM SF1086A YYWW Electrical Connections Connection Terminals Port 1 Hot 11 Port 1 Gnd Return 12 Port 2 Hot 5 Port 2 Gnd Return Case Ground E-mail: [email protected] http://www.rfm.com SF1086A-121504 6 All others Page 1 of 3 125 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF1086A-121504 Page 2 of 3 125 MHz SAW Filter SM13365-12 Case 12-Terminal Ceramic Surface-Mount Case 13.3 x 6.5 mm Nominal Footprint Case Dimensions Dimension A B C D E H P Min 13.08 6.27 Materials Max 13.60 6.80 2.00 Inches Nom 0.524 0.256 0.075 0.059 0.031 0.039 0.100 Min 0.515 0.247 Max 0.535 0.268 0.079 Electrical Connections Solder Pad Termination Au plating 30 - 60 µinches (76.2-152 µm) over 80200 µinches (203-508 µm) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 µinches Thick Body mm Nom 13.31 6.50 1.91 1.50 0.79 1.0 2.54 Connection Port 1 Port 2 Al2O3 Ceramic Terminals Input or Return 2 Return or Input 3 Output or Return 8 Return or Output Pb Free 9 Ground All others Single Ended Operation Return is ground Differential Operation B 3 Return is hot C 4 D H 2 1 2 3 4 1 P (8 Places) 5 12 12 5 6 11 11 6 7 10 10 7 A 8 9 TOP VIEW RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. 9 E (10 Places) 8 BOTTOM VIEW E-mail: [email protected] http://www.rfm.com SF1086A-121504 Page 3 of 3 BILL OF MATERIALS PART IDENTIFIER SF1086A-DEMO SF1086A-000 400-0735-001 400-0533-001 500-0003-330 500-0248-001 500-0010-221 500-0010-271 500-0010-270 500-0010-330 DESCRIPTION 1 DESCRIPTION 2 DEMO BOARD,SF1086A ASSY DIAGRAM,DEMO BOARD, PCB,DEMO BOARD,13.3 X 6.5 SHIELD,TO-39 TEST FIXTURE CAP,CHIP,NPO,33(J),STD CONN,COAX,FLANGE MT.JACK IND,CHIP,1008CS,220NH,10% IND,CHIP,1008CS,270NH,10% IND,CHIP,1008CS,27NH,10% IND,CHIP,1008CS,33NH,10% SF1086A 0 1.0000 1.0000 2.0000 2.0000 1.0000 1.0000 1.0000 1.0000 4 HOLE SIZE FSCM NO. A SCALE QTY/ASSY NONE W/O or ECN REFERENCE DESCRIPTION PCB SHLD1 C 1,2 J 1,2 L1 L2 L3 L4 DWG NO. SF1086A-DEMO 2U874 6713 REV A SHEET 1 OF 2 REV HISTORY REV ECN DATE A 6713 05/08/98 DESCRIPTION INITIAL RELEASE SIZE FSCM NO. A SCALE NONE W/O or ECN DWG NO. SF1086A-DEMO 2U874 6713 REV A SHEET 2 OF 2