SF1097A • • • Designed for GSM Terminal IF Applications Excellent Size-to-Performance Ratio Hermetic 14 x 8 mm Surface-Mount Case 71 MHz SAW Filter Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +20 dBm Max. DC voltage between any 2 terminals 30 VDC -40 to +85 °C Storage Temperature Range Max. Soldering Profile 235°C for 90 s SMP-08 Electrical Characteristics Characteristic Nominal Center Frequency Passband Rejection Sym fC Insertion Loss at fc Notes 1 Min 1, 2 ±90 Max Units MHz 6.5 9.0 dB IL 2 dB Passband BW2 3 dB Passband BW3 Group Delay Variation over fc ±90 kHz GDV kHz ±110 500 1, 2, 3 fc-350 to fc-250 and fc+250 to fc+250 kHz nsP-P 1500 5 fc-500 to fc-350 and fc+350 to fc+500 kHz 20 fc-700 to fc-500 and fc+500 to fc+700 kHz 30 fc-2500 to fc-700 and fc+700 to fc+2500 kHz 35 Ultimate 10 MHz to fc-2.5 MHz and fc+2.5 MHz to 130 MHz 40 Except spurious responses at 1.05, 1.6, 1.8, & 2 x fc Operating Temperature Range Typ 71.000 dB 35 TA Case Style 1 °C SMP-08 14 x 8 mm Nominal Footprint Lid Symbolization (YY = year, WW = week) Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 W and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. +80 -20 RFM SF1097A YYWW Electrical Connections Connection Terminals Port 1 1, 10 Port 2 5, 6 Case Ground E-mail: [email protected] http://www.rfm.com SF1097A-051205 All others Page 1 of 5 71 MHz SAW Filter SF1097A 71 MHz SAW Filter Suggested Matching Network Pinout and reference matching network. Actual values will be different on customer PCB. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF1097A-051205 Page 2 of 5 71 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF1097A-051205 Page 3 of 5 71 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF1097A-051205 Page 4 of 5 71 MHz SAW Filter SMP-08 Case 10-Terminal Ceramic Surface-Mount Case 14 x 8 mm Nominal Footprint Case Dimensions Dimension A B C D E F G H P Min 13.69 7.70 mm Nom 14.00 8.00 1.70 2.30 1.02 3.19 0.60 1.0 1.905 Max 14.30 8.30 2.00 Min 0.539 0.303 Inches Nom 0.551 0.315 0.067 0.091 0.040 0.126 0.024 0.039 0.075 Max 0.563 0.327 0.079 Electrical Connections Connection Port 1 Port 2 Terminals Input or Return 10 Return or Input 1 Output or Return 5 Return or Output 6 Ground All others Single Ended Operation Return is ground Differential Operation TOP VIEW RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. Return is hot BOTTOM VIEW E-mail: [email protected] http://www.rfm.com SF1097A-051205 Page 5 of 5