RADSL Transformer Reinforced Insulation Per EN 41003/EN 60950 Parameter Min. Max. Turns Ratio (1-3) : (5-8) with 6 & 7 shorted 1 : 2.76 1 : 3.05 Turns Ratio (2-4) : (5-8) with 6 & 7 shorted 1 : 0.97 1 : 1.03 50 60 µH Leakage Inductance(1) .85 µH Leakage Inductance(2) 5 µH Interwinding Capacitance(3) 30 pF Interwinding Capacitance(4) 35 pF Resistance pins (1-3) 0.5 ohms Resistance pins (2-4) 2.0 ohms Resistance pins (5-8) with 6,7 shorted 2.0 ohms Primary Inductance Pins 1-3, All others windings open Schematic Diagram 1 8 3 6 2 7 4 5 Isolation (Hi-Pot) 3000 DC Bias Physical Dimensions inches (mm) .81 (20.6) Units VRMS 2 mA Insertion Loss 35 kHz to 1.0 MHz 0.5 dB Longitudinal Balance 35 KHz to 650 KHz -60 dB Signal Voltage (secondary) 20 Vp-p THD, Total Harmonic Distortion 15 Vp-p @ 100 KHz at (5-8) with 6,7 shorted -80 dB 1. Tested at 100 KHz & 100 mV (1-3) with 2,4 open 5,6,7,8 shorted .81 (20.6) 2. Tested at 100 KHz & 100 mV (2-4) with 1,3 open 5,6,7,8 shorted 3. Tested at 100 KHz & 100 mV (1-3) to (5-8) with 6,7 shorted .415 (10.54) 4. Tested at 100 KHz & 100 mV (2-4) to (5-8) with 6,7 shorted .120 (3.05) MIN. .200 (5.08) TYP. Pin Diameter is 0.024 (0.6) .69 (17.5) Bottom View 1 2 3 4 RHOMBUS P/N: T-1014 8 7 6 5 Rhombus Industries Inc. Transformers & Magnetic Products CUST P/N: DATE: 01/02/98 FSCM No. 16714 NAME: GLOBESPAN SHEET: 1 of 1 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971