5-1-1 Unicolor lamps ■3.1φ Bow Shaped LEDs SEL4029 Series (available as Direct Mount) Forward Voltage Part Number Emitting Color SEL4229R SEL4829A SEL4929A SEL4729KH SEL4429E VF (V) Lens Color Red Amber Orange Yellow Green Diffused red Transparent orange Transparent orange Transparent yellow Transparent green TYP 1.9 1.9 1.9 2.0 2.0 Luminous Intensity Peak Wavelength Conditions IF (mA) MAX 2.5 2.5 2.5 2.5 2.5 10 10 10 10 10 Iv Conditions (mcd) IF (mA) TYP 21 20 18 10 18 10 60 10 60 20 λP (nm) TYP 630 610 587 570 560 Conditions IF (mA) 10 10 10 10 10 Dominant Wavelength Spectrum Half Bandwidth λd Conditions (nm) IF (mA) TYP 620 10 605 10 590 10 571 10 567 10 ∆λ (nm) TYP 35 35 33 30 20 Conditions IF (mA) 10 10 10 10 10 External Dimensions Directional Characteristics (representative example) Chip Material GaAsP GaAsP GaAsP GaP GaP (Unit: mm) 0° 50 0 50 90° 100% 60° 50 0 50 90° 100% (1.0) 60° 90° 100% 3.1±0.2 1.0min 90° 100% 60° 3.5±0.2 30° 8.0±0.2 60° 30° 20.5min 30° 0.65max Cathode 0° 30° 4.2 Resin heap 0.8max 3.0 2.4 Dimensional Tolerance: ±0.3 0.4±0.1 0.45 (2.54) Product Mass: Approx. 0.15 g 240 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs