4GBJ4005 ~ 4GBJ410 Voltage 50V ~ 1000V 4.0 Amp Glass Passivited Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free 4GBJ FEATURES Surge overload rating -150 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique results in inexpensive product The plastic material has Underwriters Laboratory flammability classification 94V-0 Mounting position: Any REF. A B C D E F G H I Millimeter Min. Max. 24.7 25.3 14.7 15.3 4.4 4.8 17.0 18.0 3.0 x 45° 3.1 3.4 4.0 2.5 2.9 0.9 1.1 REF. J K L M N P Q R S Millimeter Min. Max. 0.6 0.8 7.3 7.7 1.5 1.9 1.7 2.1 1.05 1.45 3.3 3.8 9.3 9.7 3.1 3.4 3.4 3.8 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Part Number Parameter Symbol 4GBJ 4005 4GBJ 401 4GBJ 402 4GBJ 404 4GBJ 406 4GBJ 408 4GBJ 410 Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward (with heat sink) 2 Rectified Current @TC=100°C (without heat sink) Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage @ 4A DC Maximum DC Reverse Current at Rated DC Blocking Voltage 4 I(AV) IFSM 120 A VF 1.1 V TJ=25°C TJ=125°C 2 I t Rating for Fusing (t<8.3ms) Typical Junction Capacitance Per Element Typical Thermal Resistance Operating and Storage temperature range 1 A 2.4 10 IR µA 500 It 2 93 As 2 CJ 45 pF RθJC 2.2 °C/W TJ,TSTG -55~150 °C Notes： 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Device mounted on 50mm*50mm*1.6mm Cu plate heat sink. http://www.SeCoSGmbH.com/ 19-Oct-2011 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 4GBJ4005 ~ 4GBJ410 Elektronische Bauelemente Voltage 50V ~ 1000V 4.0 Amp Glass Passivited Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 19-Oct-2011 Rev. A Any changes of specification will not be informed individually. Page 2 of 2