BAV170 Low-leakage Double Diode Plastic-Encapsulate Diode Elektronische Bauelemente RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free FEATURES z Low leakage current: typ. 3pA z Switching time: typ. 0.8µs z Continuous reverse voltage:max.75V 1 z Repetitive peak reverse voltage:max.85V 2 z Repetitive peak forward current: max. 500mA. A L 3 Top View V B S G C MARKING:JX' H D J K SOT-23 Maximum Ratings @TA=25℃ Parameter Repetitive Peak reverse voltage DC Blocking Voltage non-repetitive peak forward current square wave; Tj=25C prior to surge; tp=1μs tp=1ms tp=1s 1.200 1.400 0.890 1.110 85 V D 0.370 0.500 75 V G 1.780 2.040 H 0.013 0.100 J 0.085 0.177 K 0.450 0.600 L 0.890 1.020 S 2.100 2.500 V 0.450 0.600 VR 215 125 mA 500 mA IFSM 4 1 0.5 A thermal resistance from junction to tie-point Rth j-tp 360 K/W thermal resistance from junction to ambient note1; Rth j-a 500 K/W Total Power Dissipation Ptot 250 mW Junction temperature TJ 150 ℃ TSTG -65 to+150 ℃ Storage temperature range 3.040 C VRRM IFRM repetitive peak forward current Max 2.800 B Limits IF Min A Unit Symbol continuous forward current single diode loaded; note1; double diode loaded; note1; Dim All Dimension in mm Note1.Device mounted on a FR4 printed-circuit board. Electrical Characteristics @TA=25℃ Parameter Forward voltage Conditions Symbol Min. Typ. Max. Unit VF1 IF=1mA 0.9 V VF2 IF=10mA 1.0 V VF3 IF=50mA 1.1 V VF4 IF=150mA 1.25 V reverse current IR VR=75V 5 nA Reverse recovery time trr IF=IR=10mA,RL=100Ω 3 us Diodes Capacitance Cd VR=0,f=1MHz http://www.SeCoSGmbH.com 27-Sep-2010 Rev. B 2 pF Any changing of specification will not be informed individual Page 1 of 3 BAV170 Elektronische Bauelemente Low-leakage Double Diode Plastic-Encapsulate Diode Typical Characteristics http://www.SeCoSGmbH.com 27-Sep-2010 Rev. B Any changing of specification will not be informed individual Page 2 of 3 BAV170 Elektronische Bauelemente Low-leakage Double Diode Plastic-Encapsulate Diode Typical Characteristics http://www.SeCoSGmbH.com 27-Sep-2010 Rev. B Any changing of specification will not be informed individual Page 3 of 3