BAV89 0.715 A , 70 V Surface Mount Switching Diode Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES SOT-23 Fast switching speed Max:4ns. High conductance. Connected in series. Surface mount package ideally suited for automatic insertion. A L 3 3 C B Top View 1 1 K 2 E 2 APPLICATIONS D High-speed switching in thick and thin-film circuits. F G MARKING REF. F7 A B C D E F PACKAGE INFORMATION Package MPQ Leader Size SOT-23 3K 7 inch Millimeter Min. Max. 2.70 3.04 2.10 2.80 1.20 1.60 0.89 1.40 1.78 2.04 0.30 0.50 H REF. G H J K L J Millimeter Min. Max. 0.18 0.40 0.60 0.08 0.20 0.6 REF. 0.85 1.15 ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) Parameter Symbol Value Unit Reverse voltage VR 70 V Forward current IF 215 mA Peak forward surge current IFM 500 mA Maximum Recurrent Peak Reverse Voltage VRRM 70 V Maximum Average Forward Rectified Current IF(AV) 715 mA Repetitive Peak Reverse current IFRM 450 mA t=1.0µs Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC t=1.0ms Method) t=1.0s IFSM Power dissipation Pd 225 mW RθJA 556 °C / W TJ,TSTG -65~150 °C Typical Thermal Resistance Operating and storage temperature range http://www.SeCoSGmbH.com/ 23-Jun-2011 Rev. A 2.0 1.0 A 0.5 Any changes of specification will not be informed individually. Page 1 of 2 BAV89 0.715 A , 70 V Surface Mount Switching Diode Elektronische Bauelemente ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Parameter Reverse Breakdown Voltage Forward Voltage Reverse Voltage Leakage Current Symbol Min. Typ. Max. Unit V(BR)R 75 - - V VF1 - - 0.715 VF2 - - 0.855 VF3 - - 1 VF4 - - 1.25 IR1 - - Test Condition IR=2.5µA IF=1mA V IF=10mA IF=50mA IF=150mA 0.025 VR=20V IR2 2.5 VR=75V IR3 30 IR4 µA 50 VR=25V Tj=150°C VR=75V Tj=150°C Diode Capacitance CD - - 2.0 pF VR=0 , f = 1MHz Reverse Recovery Time TRR - - 4.0 nS IF=IR=10mA, IRR=0.1 x IR, RL=100Ω RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 23-Jun-2011 Rev. A Any changes of specification will not be informed individually. Page 2 of 2