D3SB10 ~ D3SB100 100 V ~ 1000 V 4.0 Amp High Current Glass Passivated Molding Single-Phase Bridge Rectifier Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen-free and RoHS Compliant D3-4SB FEATURES Plastic Package has Underwriters Laboratory Flammability Classification 94V-0 High current capacity with small package Glass passivated chip junctions Superior thermal conductivity High IFSM C R A J N F H Q S B G K D P E L L L Millimeter Min. Max. 24.7 25.3 14.7 15.3 4.58 4.62 17.0 18.0 0.50 0.90 4.50 REF. 3.50 3.90 9.3 9.7 REF. A B C D E G J F REF. K L N P Q R S H Millimeter Min. Max. 2.50 2.90 7.30 7.70 3 X 45° 0.90 1.10 1.50 REF. 3.00 3.40 0.8 1.2 3.0 4.0 MAXIMUM RATINGS (TA=25℃ unless otherwise noted) PART NUMBERS PARAMETERS SYMBOL UNITS VRRM Maximum RMS voltage VRMS 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 100 200 400 600 800 1000 V Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IR D3SB D3SB 40 60 400 600 D3SB 100 1000 Maximum repetitive voltage Maximum DC reverse current at @TA=25°C rated DC blocking voltage @TA=125°C With heatsink Maximun average forward TC=100°C rectified output current at Without heatsink TA=40°C D3SB 20 200 D3SB 80 800 D3SB 10 100 10 V A 500 4.0 IO A 2.3 IFSM 150 A Rating of fusing (t < 8.3ms) l2t 93 A2sec Maximum Instantaneous Forward Voltage @ 2.0A VF 1.1 V Dielectric strength terminals to case, AC 1 minute Current 1mA Vdia 2.5 KV Maximum thermal on P.C.B without heat-sink RθJA 26 Resistance per leg on AI plate heat-sink RθJC 4.2 TJ , TSTG 150 , -55 ~ 150 °C Tor Rating Torque：0.8 N.m Operating and Storage Temperature Range Mounting torque http://www.SeCoSGmbH.com/ 05-Aug-2010 Rev. A °C / W Any changes of specification will not be informed individually. Page 1 of 2 D3SB10 ~ D3SB100 Elektronische Bauelemente 100 V ~ 1000 V 4.0 Amp High Current Glass Passivated Molding Single-Phase Bridge Rectifier CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 05-Aug-2010 Rev. A Any changes of specification will not be informed individually. Page 2 of 2