ES11M~ES15M 50V ~ 600V 1.0 Amp Surface Mount Efficient Fast Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free DESCRIPTIONS SOD-123M Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. Low profile surface mounted application in order to optimize board space. Small plastic SMD package. TRR less than 25nS for high efficiency Low forward drop down voltage High surge and high current capability. Superfast recovery time for switching mode application. Glass-passivated chip junction. A B F D C E REF. A B C MECHANICAL DATA Case: Molded plastic Epoxy: UL94-V0 rate flame retardant Weight: 0.0270 g (approximately) Millimeter Min. Max. 3.50 3.90 1.40 1.80 1.30 1.70 E REF. D E F Millimeter Min. Max. 3.60 (MAX.) 0.80 (TYP.) 0.30 (TYP.) MARKING Part Number Marking Part Number Marking ES11M E3 ES14M E4 ES12M ES13M E3 E3 ES15M E5 PACKAGING INFORMATION Package MPQ Leader Size SOD-123M 2.5K 7 inch ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) Part Number Symbol Parameters Units ES11M ES12M ES13M ES14M ES15M Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 V Maximum RMS Voltage VRMS 35 70 140 280 420 V Maximum Reverse Voltage VR 50 100 200 400 600 V Maximum Forward Voltage @ IF=1A VF 1.25 1.75 V Maximum Average Forward Rectified Current @TA=55°C Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum DC Reverse Current at Rated DC Blocking Voltage TA=25°C TA=125°C Reverse Recovery Time Typical Junction Capacitance 1 Storage and Operating Temperature Range 0.875 IO 1.0 A IFSM 30 A IR 5 100 µA TRR 25 nS CJ 15 pF TSTG, TJ -65~175, -55~150 °C Note: 1. f=1MHz and applied 4V DC reverse voltage http://www.SeCoSGmbH.com/ 09-Dec-2011 Rev. B Any changes of specification will not be informed individually. Page 1 of 2 ES11M~ES15M Elektronische Bauelemente 50V ~ 600V 1.0 Amp Surface Mount Efficient Fast Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 09-Dec-2011 Rev. B Any changes of specification will not be informed individually. Page 2 of 2