KBU8005G ~ KBU810G Voltage 50V ~ 1000V 8.0Amp Glass Passivited Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free KBU FEATURES Surge overload rating -175 Amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique The plastic material has Underwriters Laboratory Mounting postition:Any Mounting torgue:5 In.Ib.Max REF. A B C D E F Millimeter Min. Max. 22.7 23.7 18.8 19.8 6.5 7.0 16.8 17.8 4.0 x 45° 3.8 Ø x5.7L G H I J K Millimeter Min. Max. 7.5 REF 25.4 1.2 Ø TYP. 4.6 5.6 1.8 2.2 REF. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Part Number Symbol KBU 8005G KBU 801G KBU 802G KBU 804G KBU 806G KBU 808G KBU 810G Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Parameter Maximum Average Forward Rectified Current @TC=100°C Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage @ 4A Maximum DC Reverse Current at Rated DC Blocking Voltage I(AV) 8 A IFSM 175 A VF 1.1 V TJ=25℃ TJ=100℃ Typical Junction Capacitance Per Element Operating and Storage temperature range 1 10 IR µA 100 CJ 250 pF TJ,TSTG -55~150 °C Notes： 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. http://www.SeCoSGmbH.com/ 26-Oct-2011 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 KBU8005G ~ KBU810G Elektronische Bauelemente Voltage 50V ~ 1000V 8.0Amp Glass Passivited Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 26-Oct-2011 Rev. A Any changes of specification will not be informed individually. Page 2 of 2