RH101 ~ RH105 Voltage 100V ~ 800V 0.8 Amp Silicon Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES MBS Ideal for printed circuit board Lead tin plated copper Reliable low cost construction utilizing, molded plastic technique results in inexpensive product MECHANICAL DATA Polarity: Symbol molded on body Weight: 0.0044 ounces,0.125 grams Mounting position :Any PACKAGE INFORMATION Package MPQ Leader Size MBS 3K 13 inch REF. A B D E F G Millimeter Min. Max. 4.50 4.90 7.00 2.30 2.70 3.80 4.20 2.30 2.70 1.30 1.70 REF. H J K L M Millimeter Min. Max. 0.70 1.10 0.50 0.80 0.90 1.30 0.15 0.35 0.20 REF. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Parameter Part Number Symbol Unit RH101 RH102 RH103 RH104 RH105 Maximum Recurrent Peak Reverse Voltage VRRM 100 200 400 600 800 V Maximum RMS Bridge Input Voltage VRMS 70 140 280 420 560 V Maximum DC Blocking Voltage VDC 100 200 400 600 800 V Maximum Average Forward Rectified Current @TA=40°C 1 Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage @ 0.8A Maximum DC Reverse Current at Rated DC Blocking Voltage TA=25°C I2t Rating for Fusing (t＜8.3ms) IFSM 40 A VF 1.15 V TRR 2 5 μA 500 A2s 3.7 150 250 500 nS CJ 13 pF RθJC 75 °C / W TJ,TSTG -55~150 °C 3 Operating and Storage temperature range A I2t Maximum Reverse Recovery Time Typical Thermal Resistance 0.8 IR TA=125°C Typical Junction Capacitance Per Element I(AV) Note: 1. Mounted on P.C. board. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Thermal resistance junction to ambient. http://www.SeCoSGmbH.com/ 01-Feb -2012 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 RH101 ~ RH105 Elektronische Bauelemente Voltage 100V ~ 800V 0.8 Amp Silicon Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 01-Feb -2012 Rev. A Any changes of specification will not be informed individually. Page 2 of 2