SM10150D Voltage 150 V 10A Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES 2 TO-263(D -PACK) Low forward voltage drop High current capability High reliability High surge current capability Epitaxial construction C D A MECHANICAL DATA Case: Molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Lead solderable per MIL-STD-202 method 208 guaranteed Polarity: As Marked Mounting position: Any Weight: 2.24 grams GE O REF. A C D E F G K HF M L J Millimeter Min. Max. 9.50 10.50 4.30 4.80 1.17 1.45 9.50 10.50 4.33 5.93 8.50 9.00 N P REF. H J K L M P Millimeter Min. Max. 1.50 REF. 2.54 TYP. 0.71 1.00 1.17 1.47 0.31 0.53 MAXIMUM RATINGS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) PARAMETER SYMBOL RATING UNIT Maximum Repetitive Peak Reverse Voltage VRRM 150 V Maximum RMS Voltage VRMS 150 V Maximum DC Blocking Voltage VDC 150 V Maximum Average Forward Rectified Current (per leg) 5 IF (per device) Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage @5A Maximum Reverse Current at Rated 2 VRRM Per Diode Typical Junction Capacitance IFSM TA=25°C 130 A 0.86 VF TA=100°C V 0.75 TA=25°C 0.1 IR TA=100°C mA 8 1 CJ 350 pF dv/dt 10000 V / µs RθJA 50 °C / W RθJc 3 °C / W TJ ,TSTG -55~150 °C Voltage Rate Of Change Typical Thermal Resistance Operating & Storage Temperature A 10 NOTES: 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2. Plus test: 300µS Pulse width, 1% duty cycle.. http://www.SeCoSGmbH.com/ 08-Dec-2011 Rev. B Any changes of specification will not be informed individually. Page 1 of 2 SM10150D Elektronische Bauelemente Voltage 150 V 10A Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 08-Dec-2011 Rev. B Any changes of specification will not be informed individually. Page 2 of 2