BFX29 MECHANICAL DATA Dimensions in mm (inches) PNP SILICON EPITAXIAL TRANSISTOR 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) APPLICATIONS 6.10 (0.240) 6.60 (0.260) • General Purpose Industrial Applications 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. 5.08 (0.200) typ. 2.54 (0.100) 2 1 3 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 45° TO39 PACKAGE Pin 1 = Emitter Pin 2 = Base Pin 3 = Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Collector – Base Voltage 60V VCEO Collector – Emitter Voltage 60V VEBO Emitter – Base Voltage 5V IC Collector Current Continuous 600mA ICM Collector Current Peak 600mA IEM Emitter Current Peak 600mA Ptot Total Power Dissipation Tamb < 25°C Tstg Storage Temperature Tj Operating Junction Temperature 600 mW –65 to 200°C 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3083 Issue 2 BFX29 ELECTRICAL CHARACTERISTICS (Tj = 25°C unless otherwise stated) Parameter IEBO ICBO hFE VCE(sat) Emitter Cut–off Current Collector Cut–off Current DC Current Gain Collector – Emitter Saturation Voltage VBE(sat) Base – Emitter Saturation Voltage Ctc Collector Capactitance Cte Emitter Capactitance fT Transistion Frequency Test Conditions Min. Typ. Max. VEB = 5.0V IC = 0 30 500 VEB = 3V IC = 0 1.0 100 VCB =60V IE = 0 1.0 500 VCB =50V IE = 0 0.5 50 Tj = 100°C 0.03 2.0 VCE =10V IC = 0.1mA 20 90 VCE = 10V IC = 1mA 40 105 VCE = 10V IC = 10mA 50 125 VCE =10V IC = 50mA 50 125 VCE = 10V IC = 150mA 40 90 IC = 150mA IB = 15mA 0.15 0.40 IC = 30mA IB = 1.0mA 0.77 0.90 IC = 150mA IB = 15mA 1.05 1.30 VCB = 10V IE = Ie =0 6 12 f=1.0MHz VEB = 2.0V 18 f=1.0MHz IC = 50mA f=100MHz Tamb = 25°C nA nA µA — V V pF IC = Ic =0 VCE = 10V Unit 100 30 MHz 360 THERMAL CHARACTERISTICS Rθth(j-amb) Thermal Resistance Junction to Ambient 292 °C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3083 Issue 2