FAST SWITCHING NPN POWER TRANSISTOR BUV62A • Fast Switching Times • Low Switching Losses • Low Saturation Voltage • Hermetic TO3 Metal package. • Ideally suited for Motor Control, Switching and Linear Applications • High Reliability Screening Options Available ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise stated) VCEV VCEO VEBO IC ICM IB IBM PD TJ Tstg VBE = -1.5V Collector – Emitter Voltage Collector – Emitter Voltage Emitter – Base Voltage Continuous Collector Current Peak Collector Current Base Current Base Peak Current TC = 25°C Total Power Dissipation at Derate Above 25°C Junction Temperature Range Storage Temperature Range 400V 300V 7V 40A 60A 8A 12A 250W 1.43W/°C -55 to +200°C -65 to +200°C THERMAL PROPERTIES Symbols Parameters Min. RθJC Thermal Resistance, Junction To Case Typ. Max. Units 0.70 °C/W Semelab Ltd reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing an order. Semelab Ltd Telephone +44 (0) 1455 556565 Email: [email protected] Coventry Road, Lutterworth, Leicestershire, LE17 4JB Fax +44 (0) 1455 552612 Website: http://www.semelab-tt.com Document Number 8320 Issue 1 Page 1 of 3 FAST SWITCHING NPN POWER TRANSISTOR BUV62A ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise stated) Symbols Parameters Test Conditions V(BR)CEO(1) IC = 10mA IB = 0 300 V(BR)EBO Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage IE = 50mA IC = 0 7 ICEX Collector Cut-Off Current VCE = 400V VBE = -1.5V 1.0 Tj = 100°C 4.0 ICER Collector Cut-Off Current RBE = 10Ω 1.0 Tj = 100°C 5.0 IEBO Emitter Cut-Off Current VEB = 5V IC = 0 1.0 IC = 15A IB = 1.5A 0.9 Tj = 100°C 1.9 IB = 1.5A 1.3 Tj = 100°C 1.3 (1) VCE(sat) VBE(sat) (1) Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage VCE = 400V IC = 15A Min. Typ. Max. Units V mA V Notes (1) Pulse Width ≤ 300us, δ ≤ 2% DYNAMIC CHARACTERISTICS (Inductive Load) Symbols Parameters Test Conditions Min. Typ. Storage Time VCC = 250V Vclamp = 300V 2.2 tf Fall Time IC = 15A IB = 1.5A RB2 = 1.6Ω 0.2 tc VBB = -5V Crossover Time LC = 0.83mH VCC = 50V Tj = 100°C ts VCEW Maximum Collector Emitter Voltage without Snubber Semelab Ltd Telephone +44 (0) 1455 556565 Email: [email protected] VBB = -5V LC = 0.83mH Tj = 125°C Max. Units µs 0.3 ICWoff = 22A IB1 = 1.5A RBB = 1.6Ω Coventry Road, Lutterworth, Leicestershire, LE17 4JB Fax +44 (0) 1455 552612 Website: http://www.semelab-tt.com 300 V Document Number 8320 Issue 1 Page 2 of 3 FAST SWITCHING NPN POWER TRANSISTOR BUV62A MECHANICAL DATA Dimensions in mm (inches) 3 9 .9 5 (1 .5 7 3 ) m a x . 3 0 .4 0 (1 .1 9 7 ) 3 0 .1 5 (1 .1 8 7 ) 4 .0 9 (0 .1 6 1 ) 3 .8 4 (0 .1 5 1 ) d ia . 2 p lc s . 1 1 .1 8 (0 .4 4 0 ) 1 0 .6 7 (0 .4 2 0 ) 2 1 2 6 .6 7 (1 .0 5 0 ) m a x . 1 7 .1 5 (0 .6 7 5 ) 1 6 .6 4 (0 .6 5 5 ) 1 2 .0 7 (0 .4 7 5 ) 1 1 .3 0 (0 .4 4 5 ) 1 .7 8 (0 .0 7 0 ) 1 .5 2 (0 .0 6 0 ) 7 .8 7 (0 .3 1 0 ) 6 .9 9 (0 .2 7 5 ) 2 0 .3 2 (0 .8 0 0 ) 1 8 .8 0 (0 .7 4 0 ) d ia . 1 .5 7 (0 .0 6 2 ) 1 .4 7 (0 .0 5 8 ) d ia . 2 p lc s . TO3 (TO-204AE) Pin 1 - Base Semelab Ltd Telephone +44 (0) 1455 556565 Email: [email protected] Pin 2 - Emitter Case - Collector Coventry Road, Lutterworth, Leicestershire, LE17 4JB Fax +44 (0) 1455 552612 Website: http://www.semelab-tt.com Document Number 8320 Issue 1 Page 3 of 3