SML6686 MECHANICAL DATA Dimensions in mm (inches) 9 (0 1 (0 9 (0 9 (0 .1 8 .2 0 .0 5 .0 9 5 ) 1 5 .4 9 (0 .6 1 0 ) 1 6 .2 6 (0 .6 4 0 ) 9 ) 9 ) 8 ) FEATURES 6 .1 5 (0 .2 4 2 ) B S C 4 .6 5 .3 1 .4 2 .4 NPN MULTI-EPITAXIAL POWER TRANSISTOR 2 0 .8 0 (0 .8 1 9 ) 2 1 .4 6 (0 .8 4 5 ) 5 .3 8 (0 .2 1 2 ) 6 .2 0 (0 .2 4 4 ) • FAST SWITCHING 4 .5 0 (0 .1 7 7 ) M A X 3 .5 5 (0 .1 4 0 ) 3 .8 1 (0 .1 5 0 ) • HIGH CURRENT • HIGH RELIABILITY ! 1 9 .8 1 (0 .7 8 0 ) 2 0 .3 2 (0 .8 0 0 ) 0 .4 0 (0 .0 1 6 ) 0 .7 9 (0 .0 3 1 ) • LOW VCE(sat) 2 .8 7 (0 .1 1 3 ) 3 .1 2 (0 .1 2 3 ) 1 .6 5 (0 .0 6 5 ) 2 .1 3 (0 .0 8 4 ) 1 .0 1 (0 .0 4 0 ) 1 .4 0 (0 .0 5 5 ) APPLICATIONS • HIGH FREQUENCY AND EFFICIENCY CONVERTERS • SWITCHING REGULATORS 5 .2 5 (0 .2 1 5 ) B S C 2 .2 1 (0 .0 8 7 ) 2 .5 9 (0 .1 0 2 ) • MOTOR CONTROLS TO–247 PIN 1 – Base PIN 2 – Collector PIN 3 – Emitter. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCEX Collector – Emitter Voltage (VBE = -1.5V) 300V VCEO Collector – Emitter Voltage (IB = 0) 160V VEBO Emitter – Base Voltage IC Collector Current 30A IC(PK) Peak Collector Current 40A IB Base Current IB(pk) Peak Base Current Ptot Total Dissipation at Tcase = 25°C TSTG Storage Temperature Range TJ Maximum Operating Junction Temperature RqJC Thermal Resistance (Junction – Case) 7V 8A 15A 175W –55 to 200°C 200°C 0.875°C/W Max. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 2652 Issue 1 SML6686 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter VCEO(sus) Test Conditions Collector - Emitter Sustaining IC = 0.2A Voltage L = 25mH V(BR)EBO Emitter – Base Breakdown Voltage IC = 0 ICEX Collector Cut-off Current IB = 0 IE = 1mA V 7 V TJ = 100°C 4.0 RBE = 10R VCE = VCEX 1.0 TJ = 100°C 5.0 0.5 Emitter Cut-off Current IC = 0 VBE = –5V Collector – Emitter Saturation IC = 25A IB = 2.5A 0.5 TJ = 100°C Voltage IC = 25A 0.9 1.5 IB = 2.5A 1.2 TJ = 100°C Saturation Voltage Unit 160 VBE = –1.5V IEBO Base – Emitter Max. 1.0 Collector Cut-off Current VBE(sat)* Typ. VCE = VCEX ICER VCE(sat)* Min. 1.5 1.4 mA mA V V * Pulse Test: tp = 300ms, d £ 2% SWITCHING CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit Switching Characteristics (Resistive Load) tr Rise Time IC = 20A 0.8 ts Storage Time IB1 = IB2 = 2.5A 2.2 tf Fall Time VCC = 80V 0.6 ms Preliminary Datasheet Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 2652 Issue 1