RGL1A THRU RGL1M SURFACE MOUNT FAST SILICON RECTIFIERS Reverse Voltage - 50 to 1000 V Forward Current - 1 A Features • Plastic material has UL classification 94V-0 • For surface mounted application Solderable Ends D1= 1.7 1.5 D2 Mechanical Data • Case: MiniMELF(DO-213AA), molded plastic body • Terminals: Plated terminals solderable per MIL-STD-750 • Polarity: Color band denotes cathode end • Mounting Position: Any 0.6 0.25 D2 = D1+0 -0.203 3.7 3.3 MiniMELF (DO-213AA) Plastic Package Dimensions in millimeters Maximum Ratings and Electrical characteristics Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Symbols RGL1A Repetitive Peak Reverse Voltage Surge Peak Reverse Voltage O RGL1B RGL1D RGL1G RGL1J RGL1K RGL1M Units VRRM 50 100 200 400 600 800 1000 V VRSM 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current at TT = 75 C IF(AV) 1 A Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) IFSM 20 A Maximum Forward Voltage at 1 A VF 1.3 V IR 5 50 µA O Maximum Reverse Current at VR = VRRM Tj = 25 C Tj = 125 OC Maximum Reverse Recovery Time 1) trr 150 250 500 ns 2) RθJA 150 K/W Maximum Thermal Resistance Junction to Terminals RθJT 60 K/W Tj,Tstg - 50 to + 175 Maximum Thermal Resistance Junction to Ambient Operating and Storage Temperature Range 1) Reverse recovery conditions: IF = 0.5 A, IR = 1 A, Irr = 0.25 A 2) Mounted on P.C. board with 25 mm copper pads at each terminal 2 SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 30/03/2009 N O C