SENSITRON SHD116022_08

SHD116022
SHD116022B
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1148, REV. B
HERMETIC POWER SCHOTTKY RECTIFIER
Low Forward Voltage Drop
DESCRIPTION: A 45 VOLT, 3.0 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-1/1B PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
45
Volts
IO
3.0
Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(t=8.3ms, Sine)
IFSM
55
Amps
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode)
RθJC
7.07
°C/W
MAXIMUM OPERATING TEMPERATURE RANGE
Top/Tstg
-65 to
+ 175
°C
MAXIMUM STORAGE TEMPERATURE RANGE
Top/Tstg
-65 to
+ 175
°C
SYMBOL
MAX.
UNITS
Vf
0.64
0.57
Volts
Ir
0.08
3.0
mA
CT
160
pF
PEAK INVERSE VOLTAGE
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC)
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 3.0 Amps)
TJ = 25 °C
TJ = 125 °C
MAXIMUM REVERSE CURRENT (Ir @ 45V PIV)
TJ = 25 °C
TJ = 125 °C
MAXIMUM JUNCTION CAPACITANCE
(Vr =5V)
©2001 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected]
SHD116022
SHD116022B
SENSITRON
DATA SHEET 1148, REV. B
MECHANICAL DIMENSIONS: In Inches / mm
.225±.010
(5.71±.254)
.375±.020
(9.52±.508)
.225±.010
(5.71±.254)
.225±.010
(5.71±.254)
.150±.010
(3.81±.254)
.225±.010
(5.71±.254)
.015±.005
(.381±.127)
Copper
A d
.020±.005 R
(.508±.127 )
.090 (2.29) Max
.075 (1.91) M ax
M oly Lid
Alumina
Ri
Alumina R ing
.015±.002
(.381±.051)
Moly Base
(Cathode)
M oly Base
.060±.010
(1.52±.254)
SHD-1
SHD-1B
PINOUT TABLE
TYPE
SINGLE RECTIFIER
in a Surface Mount Package
PIN 1 (Base)
CATHODE
PIN 2
ANODE
VF @ 1A -55°C typical = 0.56V
Typical Forward Characteristics
Typical Reverse Characteristics
101
Instantaneous Reverse Current - I R (mA)
101
150 °C
100
125 °C
10-1
100 °C
75 °C
10-2
50 °C
10-3
25 °C
-4
125 °C
10
100
0
0.2
0.3
0.4
0.5
0.6
0.7
Forward Voltage Drop - V F (V)
10
20
30
Reverse Voltage - VR (V)
40
50
Typical Junction Capacitance
25 °C
0.8
Junction Capacitance - CT (pF)
Instantaneous Forward Current - I F (A)
175 °C
175 °C
150
125
100
75
50
0
10
20
30
Reverse Voltage - VR (V)
40
50
©2001 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected]
SHD116022
SHD116022B
SENSITRON
DATA SHEET 1148, REV. B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2001 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected]