SENSITRON SHD218602

SHD218602
SHD218602A
SHD218602B
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 863, REV -
HERMETIC POWER MOSFET
N-CHANNEL
FEATURES:
• 100 Volt, 0.020 Ohm MOSFET
• Isolated and Hermetically Sealed
• Surface Mount Package
MAXIMUM RATINGS
ALL RATINGS ARE AT TA = 25°C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
CONTINUOUS DRAIN CURRENT
VGS=10V, TC = 25°C
VGS=10V, TC = 100°C
PULSED DRAIN CURRENT
@ TC = 25°C
OPERATING AND STORAGE TEMPERATURE
TERMAL RESISTANCE JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25°C
SYMBOL
VGS
ID
MIN.
-
TYP.
-
UNITS
Volts
Amps
-
MAX.
±20
75
60
300
+150
0.30
300
IDM
TOP/TSTG
RθJC
PD
-55
-
BVDSS
100
-
-
Volts
-
-
Amps
°C
°C/W
Watts
ELECTRICAL CHARACTERISTICS
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 250μA
DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 37.5A
VGS = 10V, ID = 37.5A, TJ = 125°C
GATE THRESHOLD VOLTAGE
VDS = VGS, ID = 1mA
FORWARD TRANSCONDUCTANCE
VDS ≥ 10V, ID = 75A
ZERO GATE VOLTAGE DRAIN CURRENT, TJ = 25°C
(VDS = 0.8xMax. Rating, VGS = 0V), TJ = 125°C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -20V
TOTAL GATE CHARGE
VGS = 10 V,
GATE TO SOURCE CHARGE
VDS = 50V,
GATE TO DRAIN CHARGE
ID =37.5A
TURN ON DELAY TIME
VDD = 250V,
RISE TIME
ID = 3.7A,
TURN OFF DELAY TIME
RG = 2.0Ω,
FALL TIME
VGS = 15V
DIODE FORWARD VOLTAGE
TJ = 25°C, IF =, IS
VGS = 0V
REVERSE RECOVERY TIME
TJ = 25°C,
IS = 10A,
di/dt ≤ = 100A/μsec,
REVERSE RECOVERY CHARGE
INPUT CAPACITANCE
VGS = 0V, VDS = 25V,
OUTPUT CAPACITANCE
f=1MHz
REVERSE TRANSFER CAPACITANCE
RDS(ON)
VGS(th)
gfs
2.0
25
-
IDSS
-
-
IGSS
-
-
Qg
Qgs
Qgd
td(ON)
tr
td(OFF)
tf
VSD
-
trr
Qrr
Ciss
Coss
Crss
Ω
0.02
0.035
4.0
-
Volts
S(1/Ω)
-
180
36
85
20
40
50
20
-
250
1000
100
-100
260
70
160
30
40
75
40
1.3
Volts
-
-
200
nsec
1.4
-
μC
-
-
4500
1600
800
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
μA
nA
nC
nsec
pF
SHD218602
SHD218602A
SHD218602B
SENSITRON
DATA SHEET 863
REVISION -
MECHANICAL DIMENSIONS: in Inches / mm
.520±.020
(13.2±.508)
.510±.020
(12.9±.508)
.370±.010
(9.40±.254)
.090±.010
(2.29±.254)
.370±.010
(9.40±.254)
.125±.010
(3.17±.254)
.370±.010
(9.40±.254)
.030±.010
(.762±.254)
.320±.010
(8.13 ±.254)
.610±.010
(15.5±.254)
.320±.010
(8.13±.254)
.610±.010
(15.5±.254)
2
2
.030±.010
(.762±.254)
2
.030±.010
(.762±.254)
3
3
.610±.010
(15.5 ±.254)
3
Copper Terminals
.110 (2.79) Max
Moly Lid
.020±.005 R
(.508±.127 )
Alumina Ring
.110 (2.80) Max
Moly Lid
.020±.005 R
(.508±.127 )
Alumina Ring
Alumina Ring
Moly Base
Terminal 1
.020±.002
(.508±.051)
.060±.010
(1.52±.254)
Terminal 1
.130 (3.30) Max
.015±.002
(.381±.051)
Moly Base
Terminal 1
.060±.010
(1.52±.254)
SHD-5/5A/5B
PINOUT TABLE
DEVICE TYPE
MOSFET
SHD-5/A/B PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected]