SENSITRON SHD620112

SHD620112
SHD620112P
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA, PROVISIONAL DATA ONLY
DATA SHEET 4179, REV. B
HERMETIC SILICON CARBIDE RECTIFIER
DESCRIPTION: A 1200-VOLT, 10 AMP POWER SILICON CARBIDE RECTIFIER IN A CERAMIC
HERMETIC LCC-5 PACKAGE
FEATURES:
• NO RECOVERY TIME OR REVERSE RECOVERY LOSSES
• NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR
• SCREENED VERSIONS ARE AVAILABLE
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
1200
Volts
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC = 65 OC, for
Single Package)
IO
10
Amps
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC = 65 OC, for
Dual Package)
IO
20
Amps
MAXIMUM REPETITIVE FORWARD SURGE CURRENT
O
(t = 8.3ms, Sine) TC = 25 C
IFRM
50
Amps
MAXIMUM NON-REPETITIVE FORWARD SURGE CURREN
O
(t = 10μs, pulse) TC = 25 C
IFSM
250
Amps
Pd
20
W
MAXIMUM THERMAL RESISTANCE, Junction to Case
RθJC
1.8
°C/W
MAXIMUM OPERATING TEMPERATURE RANGE
Top
-55 to
+200
°C
MAXIMUM STORAGE TEMPERATURE RANGE
Tstg
-55 to
+200
°C
PEAK INVERSE VOLTAGE
MAXIMUM POWER DISSIPATION, TC = 25 OC
* Note: SiC semiconductors will handle at or above this operating and storage temperature. However, extended operational use of the packaged device
above 175C may reduce its future performance. All qualification testing and screening per MIL-PRF-19500 will only be performed to 175C.
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP (If = 10A) Vf
MAXIMUM REVERSE CURRENT (1200V PIV) Ir
MAXIMUM JUNCTION CAPACITANCE (Vr =400V)
TYP
MAX.
TJ = 25 °C
1.6
1.8
TJ = 175 °C
2.5
3.0
TJ = 25 °C
0.01
0.20
TJ=175 °C
0.02
1.00
CT
TOTAL CAPACITIVE CHARGE (VR=1200V IF=10A di/dt=500A/μs TJ=25°C) QC
70
60
UNITS
Volts
mA
PF
N/A
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
nC
SHD620112
SHD620112P
SENSITRON
TECHNICAL DATA, PROVISONAL DATA ONLY
DATA SHEET 4179, REV. B
MECHANICAL DIMENSIONS: IN Inches / mm
SINGLE
1
2
3
LCC-5
PINOUT TABLE
DEVICE TYPE
SINGLE RECTIFIER
DUAL RECTIFIER, COMMON CATHODE (P)
PIN 1
CATHODE
COMMON CATHODE
PIN 2
ANODE
ANODE 1
Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche
capabilities of the device are limited.
Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially
damaging conditions in their applications.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
PIN 3
ANODE
ANODE 2
SENSITRON
SHD620112
SHD620112P
TECHNICAL DATA, PROVISONAL DATA ONLY
DATA SHEET 4179, REV. B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before
ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and
safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other
arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units
according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from
applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding
the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of
international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies),
the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected]