SENSITRON SHDC626112_09

SHDC626112
SHDC626112P
SHDC626112N
SHDC626112D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA, PROVISIONAL DATA ONLY
DATA SHEET 4185, Rev. B
HERMETIC SILICON CARBIDE RECTIFIER
DESCRIPTION: A 1200-VOLT, 20 AMP POWER SILICON CARBIDE RECTIFIER IN A CERAMIC
HERMETIC TO-257 PACKAGE (GLASS SEALS NOT AVAILABLE FOR THIS VOLTAGE)
FEATURES:
• NO RECOVERY TIME OR REVERSE RECOVERY LOSSES
• NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR
• High Frequency Option - Non-magnetic Glidcop leads are available for improved performance at
high frequency; use part number prefix SHDG
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
1200
Volts
MAXIMUM DC OUTPUT CURRENT (With TC = 65 OC, for part numbers
with P and N suffixes)
IO
20
Amps
MAXIMUM DC OUTPUT CURRENT (With TC = 65 OC, for part number
with D suffix or without suffix)
IO
10
Amps
MAXIMUM REPETITIVE FORWARD SURGE CURRENT
(t = 8.3ms, Sine) per leg, TC = 25 OC
IFRM
50
Amps
MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
(t = 10μs, pulse) per leg, TC = 25 OC
IFSM
250
Amps
MAXIMUM POWER DISSIPATION, TC = 25 OC
Pd
40
W
MAXIMUM THERMAL RESISTANCE, Junction to Case (PER DUAL
PACKAGE For Common Cathode/Anode Configurations)
RθJC
1.00
°C/W
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE*
Top, Tstg
-55 to
+200
°C
PEAK INVERSE VOLTAGE
* Note: SiC semiconductors will handle at or above this operating and storage temperature. However, extended operational use of the packaged device
above 175C may reduce its future performance. All qualification testing and screening per MIL-PRF-19500 will only be performed to 175C.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
SHDC626112
SHDC626112P
SHDC626112N
SHDC626112D
SENSITRON
TECHNICAL DATA, PROVISIONAL DATA ONLY
DATA SHEET 4185, Rev. B
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
TYP
MAX.
MAXIMUM FORWARD VOLTAGE DROP (If =10A PER LEG) Vf TJ=25 °C
1.60
1.80
TJ=175 °C
2.50
3.00
TJ = 25 °C
0.01
0.20
TJ = 175 °C
0.02
1.00
mA
TOTAL CAPACITIVE CHARGE (VR=1200V, IF=10A, di/dt=500A/μs and
TJ=25°C) QC per leg
60
N/A
nC
MAXIMUM JUNCTION CAPACITANCE (Vr =400V) per leg
70
MAXIMUM REVERSE CURRENT (1200V PIV PER LEG) Ir
CT
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
UNITS
Volts
pF
SHDC626112
SHDC626112P
SHDC626112N
SHDC626112D
SENSITRON
TECHNICAL DATA, PROVISIONAL DATA ONLY
DATASHEET 4185, Rev. B
MECHANICAL DIMENSIONS
TO-257
.150 (3.81
Dia.
.140 3.56)
.665 (16.89
.645 16.38)
.537 (13.64
.527 13.39)
1.132 (28.75
1.032 26.21)
.200 (5.08
.190 4.82)
.420 (10.67
.410 10.41)
1
2
.035 (0.89
.025 0.63)
3 Places
.045 (1.14
.035 0.89)
.430 (10.92
.410 10.41)
3
.100(2.54) BSC
2 Places
.120(3.05) BSC
PINOUT TABLE
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER/COMMON CATHODE (P)
DUAL RECTIFIER/COMMON ANODE (N)
DUAL RECTIFIER/DOUBLER (D)
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
PIN 2
ANODE
COMMON
CATHODE
COMMON
ANODE
ANODE/
CATHODE
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
SCHEMATIC
1
2
SINGLE
3
1
2
3
COMMON CATHODE
1
2
3
COMMON ANODE
3
2
DOUBLER
1
Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche
capabilities of the device are limited.
Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially
damaging conditions in their applications.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
SHDC626112
SHDC626112P
SHDC626112N
SHDC626112D
SENSITRON
TECHNICAL DATA, PROVISIONAL DATA ONLY
DATASHEET 4185, Rev. B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected]