920MHz SAW Filter 10MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT92001 www.sipatsaw.com Features For RF SAW filter Single-ended operation Ceramic Surface Mount Package Small size No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz - 920 - Insertion Loss(f0±5MHz) dB - 1.7 3.5 1 dB Bandwidth MHz 10 13.58 - 20 dB Bandwidth MHz - 26.67 35 Passband Variation dB - 0.1 1 Absolute Delay usec - 0.05 - 820～890MHz dB 30 41 - 950～1000MHz dB 30 37 - Ultimate Rejection Material Temperature coefficient KHz/°C -29.44 Substrate Material - 36LT Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1A SMD3.8*3.8 Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBT92001 Rev. Date 2008-07-17 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 920MHz SAW Filter 10MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT92001 www.sipatsaw.com Matching Configuration Source/Load Impedance=50 ohm OUTPUT 50Ω INPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 3.80 0.2 Pad Configuration: 1 6 Input: Output: 5 3.80 0.2 5 2 SIPAT 92001 XXYYZZ 2 Ground: All Others 4 1.5MAX 3 Marking Configuration: 1) •: Pad Number 1 Index 1.90 2) SIPAT: Manufacturer Name 3) 92001: Part Number 6 1 4) XXYY: Date(Year/month) 5) ZZ: Identified Code 2 5 1.27 3 4 0.60 1.80 Package: SMD3.8*3.8 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBT92001 Rev. Date 2008-07-17 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 920MHz SAW Filter 10MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT92001 www.sipatsaw.com Typical Performance Frequency Respond Passband Respond Type Performance Type Performance 8.3326 -0.1674 -1.6674 -0.6674 -11.6674 -1.1674 -21.6674 Amplitude ripple(dB) Magnitude(dB) -1.6674 -31.6674 -41.6674 -2.1674 -2.6674 -51.6674 -3.1674 -61.6674 -3.6674 -71.6674 -81.6674 870 880 890 900 910 920 Frequency(MHz) 930 Horizontal: 10MHz/Div 940 950 960 -4.1674 900 970 Vertical: 10dB/Div 905 910 915 920 Frequency(MHz) 925 Horizontal: 5MHz/Div Group Delay Variation(f0±5MHz) 930 935 940 Vertical: 0.5dB/Div Phase Linearity(f0±5MHz) Type Performance Type Performance 80 200 60 150 40 X: 915 Y: 84.31 100 20 X: 925 Y: 5.854 X: 915 Y: 5.37 X: 925 Y: 49.49 Degree(deg) 0 -50 -20 -40 -100 -60 -150 -80 916 918 920 Frequency(MHz) 922 Horizontal: 2MHz/Div 924 926 928 930 Vertical: 50ns/Div 912 914 916 918 +j2.0 930 0.0 ∞ ∞ -j5.0 -j0.2 -j2.0 -j0.5 +j5.0 +j0.2 -j5.0 -j0.2 +j2.0 0.5 5.0 2.0 1.0 928 Vertical: 20deg/Div +j0.5 +j5.0 +j0.2 0.5 926 +j1.0 +j0.5 0.2 924 Smith Chart S22 +j1.0 -j2.0 -j0.5 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 922 Horizontal: 2MHz/Div Smith Chart S11 0.0 920 Frequency(MHz) 5.0 914 2.0 912 -100 910 1.0 -200 910 X: 920 Y: -4.91 0 0.2 Group Delay Time(ns) X: 920 Y: 51.38 50 Part Number LBT92001 Rev. Date 2008-07-17 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3