71MHz SAW Filter 0.2MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: UE71-0.2 www.sipatsaw.com Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 69.99 71 70.016 Insertion Loss dB - 17.7 21 2.3 dB Bandwidth MHz 0.2 0.21 - 2.5 dB Bandwidth MHz - 0.22 - 3 dB Bandwidth MHz - 0.24 - 45 dB Bandwidth MHz - 0.74 0.8 Passband Variation dB - 0.1 0.5 Group Delay Variation(f0±0.1MHz) nsec - 150 500 Absolute Delay usec - 3.72 4 f0±0.4MHz dB 45 54 - f0±0.6MHz dB 55 58 - f0±1MHz~f0±5MHz dB 60 61 - Ultimate Rejection Material Temperature coefficient KHz/°C 0.07 Substrate Material - Qz Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1C DIP3616 (36.0x16.0x5.0mm3) Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number UE71-0.2 Rev. Date 2011-02-22 Ver. 2.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 71MHz SAW Filter 0.2MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: UE71-0.2 www.sipatsaw.com Matching Configuration Source/Load Impedance=50 ohm OUTPUT 50Ω INPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 36.00±0.50 Pad Configuration: 16.00±0.50 3 Output 4 Ground All Others Marking Configuration: 6.00-φ0.80±0.10 1) 71-0.2: Part Number 4.80±0.50 9.30±0.50 71-0.2 Input 2 5 3 6 10.00±0.50 1 4 16.00±0.50 Package: DIP3616 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number UE71-0.2 Rev. Date 2011-02-22 Ver. 2.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 71MHz SAW Filter 0.2MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: UE71-0.2 www.sipatsaw.com Typical Performance Frequency Response Passband Response Type Performance Type Performance -7.7443 -16.2443 -17.7443 -16.7443 -27.7443 -17.2443 -37.7443 -17.7443 A m plitude ripple(dB ) M agnitude(dB ) -47.7443 -57.7443 -67.7443 -18.2443 -18.7443 -77.7443 -19.2443 -87.7443 -19.7443 -97.7443 -107.7443 68.5 69 69.5 70 70.5 71 Frequency(MHz) 71.5 Horizontal: 0.5MHz/Div 72 72.5 73 -20.2443 70.7 73.5 Vertical: 10dB/Div 70.8 70.9 71 Frequency(MHz) 71.1 Horizontal: 0.1MHz/Div Group Delay Variation(f0±0.1MHz) 71.2 71.3 Vertical: 0.5dB/Div Phase Linearity(f0±0.1MHz) Type Performance Type Performance 5000 5 4 4500 3 4000 1 X: 70.9 Y: 3762 X: 71.1 Y: 3810 X: 71 Y: 3713 Degree(deg) G roup Delay T im e(ns ) 2 3500 X: 70.9 Y: -0.0635 X: 71 Y: 0.3176 0 X: 71.1 Y: -0.4901 -1 -2 3000 -3 -4 70.9 71 Frequency(MHz) 71.1 Horizontal: 0.1MHz/Div 71.2 71.3 71.4 -5 70.5 71.5 Vertical: 500ns/Div 70.6 70.7 70.8 70.9 71.5 0.0 ∞ -j0.2 -j5.0 -j0.5 +j5.0 0.5 2.0 -j0.2 +j2.0 +j0.2 +j5.0 0.2 +j0.2 1.0 71.4 Vertical: 1deg/Div +j0.5 +j2.0 0.5 71.3 +j1.0 +j0.5 0.2 71.2 Smith Chart S22 +j1.0 ∞ -j5.0 -j0.5 -j2.0 -j2.0 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 71.1 Horizontal: 0.1MHz/Div Smith Chart S11 0.0 71 Frequency(MHz) 5.0 70.8 2.0 70.7 1.0 70.6 5.0 2500 70.5 Part Number UE71-0.2 Rev. Date 2011-02-22 Ver. 2.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3