SDR30010HG thru SDR30020HG Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ 30 AMP HYPER FAST RECTIFIER SDR30 __ H __ __ 2/ │ │ │ └ Screening __ = Not Screened │ │ │ TX = TX Level │ │ │ TXV = TXV Level │ │ │ S = S Level │ │ │ │ │ └ Package G= Cerpack │ │ │ └ Recovery Time H = Hyper Fast │ 010 = 100V └ Family/Voltage 015 = 150V 020 = 200V 100 - 200 VOLTS 35 nsec FEATURES: • Hyper Fast Recovery: 35 ns Maximum • High Surge Rating • Low Reverse Leakage Current • Low Junction Capacitance • Hermetically Sealed Power Package • Gold Eutectic Die Attach Available • Ultrasonic Aluminum Wire Bonds • TX, TXV, or Space Level Screening Available Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage 3/ SDR30010 SDR30015 SDR30020 Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TC= 100ºC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA= 25ºC) Operating & Storage Temperature Maximum Total Thermal Resistance Junction to Case Symbol Value Units VRRM VRWM VR 100 150 200 Volts IO 30 Amps IFSM 250 Amps TOP & TSTG -65 to +200 ºC RθJC 1.5 ºC/W NOTES: Cerpack 1/ For ordering information, price, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Higher voltages available. 4/ Both anodes tied together. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0149A DOC SDR30010HG thru SDR30020HG Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristic IF = 10 A IF = 20 A IF = 30 A IF = 10 A IF = 20 A IF = 30 A IF = 10 A IF = 20 A IF = 30 A TA = 25ºC TA = 100ºC TA = 125ºC TA = 150ºC Instantaneous Forward Voltage Drop (TA = 25ºC, 300 – 500 µsec Pulse) Instantaneous Forward Voltage Drop (TA = -55ºC, 300 – 500 µsec Pulse) Instantaneous Forward Voltage Drop (TA = 125ºC, 300 – 500 µsec Pulse) Reverse Leakage Current (100% of rated VR, 300 µs pulse min.) Reverse Recovery Time (IF = 0.5 A, IR = 1 A, IRR = 0.25 A, TA = 25ºC) TA = 25ºC Reverse Recovery Time (IF = 10 A, dIF/dt = 100 A/us) TA = 100ºC Junction Capacitance VR = 5 VDC VR = 10 VDC (TA = 25ºC, f = 1 MHz) Symbol Typ Max VF1 VF2 VF3 VF4 VF5 VF6 VF7 VF8 VF9 IR1 IR2 IR3 IR4 0.80 0.84 0.88 0.90 0.95 0.97 0.64 0.70 0.74 0.025 2.5 8 30 0.95 0.98 1.10 1.1 1.15 1.2 0.80 0.86 0.90 10 100 - Units tRR1 30 35 nsec tRR2 IRM2 tRR3 IRM3 45 2.6 85 5 nsec A nsec A CJ 470 375 500 VDC VDC VDC µA pF CASE OUTLINE: Cerpack Package Cerpack NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0149A PIN ASSIGNMENT Pin 1 Pin 2 Pin 3 Anode Anode Cathode DOC