SDR6304 thru SDR6307 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ SDR __ __ │ └ Screening 2/ __ = Not Screened │ TX = TX Level │ TXV = TXV Level │ S = S Level │ └ Family/Voltage 6304 = 50V 6305 = 100V 6306 = 150V 6307 = 200V 70 Amp Ultra Fast Recovery Rectifier 50 - 200 Volts 50 nsec Features: • • • • • • • • Maximum Ratings 3/ Peak Repetitive Reverse Voltage and DC Blocking Voltage @ 100µA Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25 °C) Operating & Storage Temperature Thermal Resistance (Junction to Case) Notes: SDR6304 SDR6305 SDR6306 SDR6307 Fast Recovery: 50nsec Maximum Low Forward Voltage Drop Low Reverse Leakage Current Single Chip Construction Hermetically Sealed For High Efficiency Applications Replacement for 1N6304, 1N6305, and 1N6306 2/ TX, TXV, and S-Level Screening Available Symbol Value Units VRRM VRWM VR 50 100 150 200 Volts Io 70 Amps IFSM 800 Amps TOP & TSTG -55 to +175 ºC RθJC 0.8 ºC/W 1/ For ordering information, price, operating curves, and availability- Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, all maximum ratings/electrical characteristics @25°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0141A DO-5 DOC SDR6306 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics 3/ Maximum Instantaneous Forward Voltage Drop (IF =70Adc, TA = 25 ºC, 300-500μs Pulse) Maximum Instantaneous Forward Voltage Drop (IF =70Adc, TA = 150 ºC, 300-500μs Pulse) Maximum Reverse Leakage Current (Rated VR, 300μs minimum pulse) Maximum Reverse Recovery Time (IF = 500 mA, IR = 1 Amp, IRR = 250 mA) Symbol Value Units VF1 0.975 VDC VF2 0.84 VDC TA = 25 ºC TA = 150 ºC IR1 IR2 25 30 μA mA TA = 25 ºC tRR 50 nsec CJ 700 pF Maximum Junction Capacitance (VR = 10VDC, TA = 25ºC, f = 1MHz) Table 1- PIN ASSIGNMENT Code Configuration Terminal Stud __ Normal Anode Cathode R Reverse Cathode Anode DO-5 Outline (Normal Pin Configuration Shown): .687 .667 1.00 MAX .060 MIN .453 .422 Ø.220 .249 .667 .375 MAX MAX 1/4-28 UNF-2A .080 MAX Ø.175 .140 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. .450 MAX .200 .115 DATA SHEET #: RC0141A DOC