SED110LB30, SED110LE30, and SED110LT30 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 110 A / 30 V Schottky Rectifier Designer’s Data Sheet Part Number / Ordering Information 1/ SED110 __ __ __ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level TXV = TXV │ │ S = S Level │ │ │ └ Voltage 30 = 30 V │ │ └ Package LB = Sedpack 3 LE = Sedpack 3 with Lead LT = Sedpack 3 with Lead and Heatsink • • • • • • • • FEATURES: 30 Volt Schottky Rectifier Average Output Current 110 Amps Low Reverse Leakage Low Forward Voltage Drop Hermetically Sealed Power Surface Mount Package Guard Ring for Overvoltage Protection Eutectic Die Attach TX, TXV, and Space Level Screening Available 2/. Consult Factory. MAXIMUM RATINGS 3/ Peak Repetitive Reverse and DC Blocking Voltage Average Rectified Forward Current o (Resistive Load, 60 Hz, Sine Wave, TC = 100 C) Peak Surge Current (8.3 ms pulse, half sine wave superimposed on Io, o allow Junction to reach equilibrium between pulses, TA = 25 C) Operating & Storage Temperature Maximum Thermal Resistance (Junction to Case) SEDPACK 3 (LB) SEDPACK 3 with Lead (LE) Symbol Value Units VRRM VRWM VR 30 Volts IO 110 Amps IFSM 1000 Amps T OP & Tstg -55 to +150 RθJC 0.3 o o C C/W SEDPACK 3 with Lead and Heatsink (LT) NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0015C DOC SED110LB30, SED110LE30, and SED110LT30 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ Symbol Maximum Value Units Instantaneous Forward Voltage Drop (TA=25ºC, 300-500 μsec pulse) IF = 25 A IF = 50 A IF = 110 A VF1 VF2 VF3 0.42 0.46 0.55 VDC Instantaneous Forward Voltage Drop (300-500 μsec pulse) TA= 125ºC, IF = 110 A VF4 0.52 VDC IR1 7.5 mA IR2 750 mA CJ 7000 pF Reverse Leakage Current (Rated VR, TA = 25ºC, 300 μsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 125ºC, 300 μsec pulse minimum) Junction Capacitance o (VR = 5V, f = 1MHz, TA = 25 C) NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. Case Outline: SEDPACK 3 PIN ASSIGNMENT Package TOP BOTTOM LEAD Sedpack 3 (LB) Anode Cathode --- Sedpack 3 with Lead (LE) Anode Cathode Anode Sedpack 3 with Lead (LT) Anode Cathode Anode Case Outline: SEDPACK 3 with Lead NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Case Outline: SEDPACK 3 with Lead and Heatsink DATA SHEET #: SH0015C DOC