SPA498-02 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 1 AMP HIGH VOLTAGE RECTIFIER BRIDGE STACK Designer’s Data Sheet Part Number / Ordering Information 1/ 6000 Volts SPA498-02 __ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level Features: • • • • • Aerospace high voltage power supply applications High blocking voltage – 6 kV minimum Low mechanical stress design TX, TXV, and Space level screening available Consult factory for: Higher blocking voltages Faster switching speeds Other electrical configurations MAXIMUM RATINGS Characteristic Peak Repetitive Reverse Voltage and DC Blocking Voltage Bridge BR1 Bridge BR2 Average Rectified Forward Current (Non-repetitive, t = 8.3 ms Pulse ) Peak Surge Current o (Non-repetitive, t = 8.3 ms Pulse, T A = 25 C) Operating and Storage Temperature Maximum Thermal Resistance Junction to Tab Symbol Value Units VR 3000 6000 Volts IO 1 Amps IFSM 25 Amps Top & Tstg -65 to +150 RθJT 2.5 ELECTRICAL SCHEMATIC o o C C/W ASPM Notes: 1/ For ordering information, price, operating curves, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0026A DOC SPA498-02 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS, @ TA = 25 oC (unless otherwise specified) PARAMETER, per each Bridge (CR1-CR6) Leg Instantaneous Forward Voltage Drop (IF = 1.0A, 300 – 500 µsec pulse) Reverse Leakage (VR = 1000V, 300 µsec pulse minimum) o TA = 25 C o TA = 100 C Reverse Recovery Time (IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A) SYMBOL MIN TYP MAX UNIT VF1 - - 1.9 Volts IR1 IR2 - - 5.0 500 µAmps tRR - 70 - nsec CASE OUTLINES: ASPM Tolerances (unless specified): .XX±.03 .XXX±.010 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0026A DOC