SPD5817SM Thru SPD5819SM Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 1 AMP 20 ─ 40 VOLTS SCHOTTKY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information1/ SPD __ __ __ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ -S = S Level └ Package Type SM = Surface Mount Round Tab Voltage/Family 5817 = 20V 5818 = 30V 5819 = 40V FEATURES: • • • • • Extremely Low Forward Voltage Drop Hermetically Sealed Surface Mount Package For High Efficiency Applications High Surge Capability Axial Lead Versions Available TX, TXV, or Space Level Screening Available2/ MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage and DC Blocking Voltage SPD5817SM SPD5818SM SPD5819SM Average Rectified Output Current ° (Resistive Load, 60Hz, Sine Wave, TA=25 C) Peak Surge Current 3/ (8.3 ms Pulse, Half Sine Wave, superimposed on IO, allow junction to reach ° equilibrium between pulses, TA=25 C) Operating and Storage Temperature Maximum Thermal Resistance Junction to End Tab SYMBOL VALUE UNIT VRRM VRWM VR 20 30 40 Volts IO 1 Amps IFSM 25 Amps T OP & TSTG -55 to +125 RθJE 40 ° ° C C/W NOTES: 1/ 2/ 3/ For ordering information, Price, and Availability- Contact Factory. Screening based on MIL-PRF-19500. Screening flows available on request ° Unless otherwise specified, all electrical ratings/characteristics @ 25 C. SURFACE MOUNT ROUND TAB NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0111M DOC SPD5817SM Thru SPD5819SM Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS Instantaneous Forward Voltage SPD5817SM Drop SPD5818SM (IF = 1 Adc, TA = 25°C, 300-500μs SPD5819SM Pulse) Instantaneous Forward Voltage SPD5817SM Drop SPD5818SM (IF = 1 Adc, TA = -55°C, 300-500μs SPD5819SM Pulse) Reverse Leakage Current (Rated VR, TA = 25°C, 300μs Pulse Minimum) Reverse Leakage Current (Rated VR, TA = 100°C, 300μs Pulse Minimum) Junction Capacitance (VR = 5 Vdc, TA = 25°C, f = 1 MHz) SYMBOL MAXIMUM UNIT VF1 0.55 0.65 0.70 Vdc VF2 0.57 0.67 0.72 Vdc IR1 0.50 mA IR2 10 mA CJ 120 pF DIMENSIONS Case Outline- Surface Mount Round Tab* Dimension Minimum Maximum ØA .090” .105” B .189” .205” C .016” .022” Note: Dimensions are prior to solder dipping * For information on curves, contact the Factory Representative for Engineering Assistance. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0111M DOC