SSR1008M, SSR1008Z SSR1009M, SSR1009Z SSR1010M, SSR1010Z Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 10 AMPS 80 - 100 VOLTS SCHOTTKY RECTIFIER 1/ SSR1008 __ __ __ SSR1009 __ __ __ SSR1010 __ __ __ │ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV Level │ S = S Level │ └ Lead Options __ = Straight Leads DB = Bent Down UB = Bent Up • • • • • • • Package M = TO-254 Z = TO-254Z FEATURES: Extremely Low Forward Voltage Drop Low Reverse Leakage Current Hermetically Sealed Package Guard Ring for Overvoltage Protection Eutectic Die Attach 175°C Operating Junction Temperature TX, TXV, or Space Level Screening Available MAXIMUM RATINGS RATING Peak Repetitive Reverse Voltage and DC Blocking Voltage SSR1008 SSR1009 SSR1010 SYMBOL VALUE VRRM VRWM VR 80 90 100 IO 10 IFSM 200 T OP & TSTG -65 to +175 RθJC 2.0 Average Rectified Output Current 3/ (Resistive Load, 60Hz, Sine Wave, TA=25°C) Peak Surge Current UNIT Volts Amps 3/ (8.3 ms Pulse, Half Sine Wave, superimposed on IO, allow ° junction to reach equilibrium between pulses, TA=25 C) Operating and Storage Temperature Maximum Thermal Resistance 3/ Junction to Case NOTES: 1/ For ordering information, price, and availability- Contact Factory. TO-254 Amps ° ° C C/W TO-254Z 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ For optimal performance, connect leads 2 & 3 together. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0205L DOC SSR1008M, SSR1008Z SSR1009M, SSR1009Z SSR1010M, SSR1010Z Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS (Per Leg) CHARACTERISTICS Instantaneous Forward Voltage Drop SYMBOL MAX UNIT VF1 VF2 VF3 0.57 0.72 0.8 Vdc VF4 VF5 0.70 0.90 Vdc Reverse Leakage Current IR1 100 μA Reverse Leakage Current IR2 5 mA Junction Capacitance CJ 400 pF ° (IF = 1 Adc, TA = 25 C, Pulse) ° (IF = 5 Adc, TA = 25 C, Pulse) ° (IF = 10 Adc, TA = 25 C, Pulse) TA = 100°C ° TA = -55 C Instantaneous Forward Voltage Drop (IF = 10 Adc, Pulse) (Rated VR, TA = 25°C, Pulse) (Rated VR, TA = 100°C, Pulse) (VR = 10 Vdc, TA = 25°C, f = 1 MHz) Case Outlines- TO-254 and TO-254Z 4/ Configuration PIN OUT: Rectifier PIN 1- CATHODE PIN 2- ANODE PIN 3- ANODE TO-254 (M Suffix) Optional Bent Down Leads (MDB & ZDB Suffix) TO-254Z (Z Suffix) Optional Bent Up Leads (MUB & ZUB Suffix) For information on curves, contact the Factory Representative for Engineering Assistance. NOTES: 4/ Pins 2 and 3 must be externally connected for best performance. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0205L DOC