SVR1009 SERIES Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET Part Number / Ordering Information SVR1009 __ __ │ │ │ └ Screening 2/ __ = Not Screened │ H = High Rel Level │ K = Space Level │ └ Package 3/ 2.5 Volts PRECISION SHUNT REGULATOR DIODE 1/ -4 = LCC 4 /46 = TO-46 /18 = TO-18 Maximum Ratings 4/ Features: • • • • • • • • • Replacement for LT1009 and LM316 Types Eutectic Die Attach Maximum Initial Tolerance: 1% Guaranteed Temperature Stability Typ. 0.2Ω Dynamic Impedance Wide Operating Current Range Hermetically Sealed Package 125oC Operating Temperature Class H or K (Space) Screening Available Symbol Value Units IR 15 mA IF ΔVZ/VZ/ΔTime 10 20 mA ppm/khr Operating Temperature TOP -55 to +150 ºC Storage Temperature TSTG -65 to +150 ºC Reverse Current Forward Current Long Term Stability (IR = 1 mA, TA = 25 + 0.1oC) LCC 4 (-4): TO-46 (/46): TO-18 (/18): FOR PACKAGE OUTLINE REQUEST FOLLOWING DOCUMENTS PACKAGE PIN ASSIGNMENT DOCUMENT PACKAGE Anode Cathode Adjust LCC 4 (-4) 60-0149-323 LCC 4 (-4) Pins 1, 2 Pin 4 Pin 3 TO-46 (/46) 60-0149-046 TO-46 (/46) Pin 1 Pin 2 Pin 3 TO-18 (/18) 60-0149-018 TO-18 (/18) Pin 1 Pin 2 Pin 3 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SVR006C DOC SVR1009 SERIES Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com to Symbol Min Typ Max Units Reverse Breakdown Voltage (IR = 1 mA) 25 VZ 2.465 2.500 2.515 Volts Reverse Breakdown Change with Current (400 μA < IR < 10 mA) 25 * ΔVZ ΔIR –– 2.6 3.0 10 12 mV 25 * rZ –– 0.2 0.4 1.0 1.4 Ω * –– –– 12 20 mV ΔVZ/VZ Temp –– 15 25 ppm/oC Electrical Characteristics Reverse Dynamic Impedance (IR = 1 mA) 5/ Change in Reference Voltage with Temperature (TMIN < TA < TMAX) Average Temperature Coefficient 5/, 6/ (0oC < TA < 70oC) SCHEMATIC: TYPICAL APPLICATION: NOTES: Full Temperature Range 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screening per MIL-PRF-19500. 3/ For Package Outlines and Led Bend Options Contact Factory. 4/ Absolute Maximum Ratings Are Those Values Beyond Which the Life of a Device May Be Impaired 5/ Guaranteed by Design. 6/ Average Temperature Coefficient is Defines as the Proportional Voltage Change Divided by the Specified Temperature Change. 7/ + 5% Trim Range. Resistance Does Not Affect Temperature Coefficient.