TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: 70MHz SAW IF Filter (BW=20MHz) TST Parts No.: TB0186A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Vincent Chiu Approval by: Francis Chen Date: 23 Sep. 2003 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com 70 MHz SAW Filter (SMD 13.3×6.5 mm) Model No.: TB0186A Rev. No.:3 RoHS Compliant Lead free Lead-free soldering A. Maximum Rating: 1. Input Power Level: +20 dBm 2. Operating Temperature: 0°C to +70°C 3. Storage Temperature: -40°C to +85°C B. Electrical Characteristics: Parameter Unit MHz Min. 69.8 Typ. 70 Max. 70.2 dB - 16 17.5 1 dB Bandwidth MHz 20 20.9 - 3 dB Bandwidth dB 21.5 22.2 - 40 dB Bandwidth MHz - 27.3 28.2 Amplitude ripple (61.76MHz~78.24MHz) dB - 0.6 1 Phase Linearity (61.2MHz~78.8MHz) (rms) deg - 1.5 5 Group Delay ripple (61.2MHz~78.8MHz) nsec - 60 100 Absolute Delay µsec - 0.72 - 0 ~ 56MHz dB 45 52 - 84~140MHz dB 45 52 - - LN-YZ - - -94 - - 25 - Center frequency, Fc Insertion Loss, IL Attenuation (Reference level from 0 dB) Substrate Material Temperature Coefficient Ambient Temperature o ppm/ C o C TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics: (1) S21 Response: Horizontal: 10 MHz/Div Vertical: 10 dB/Div (2) Group Delay and Ripple Horizontal: 2.5 MHz/Div CH1 Vertical 1: 1 dB/Div CH2 Vertical 2: 100 nsec/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. Measurement Circuit: For 50 ohm Unbalanced Input and Output Network analyzer 50Ω 130 uH K SAW Filter E 120 uH 50Ω 39 pF 33 pF A,B,C,D,F,G,H,I,J,L E. Outline Drawing: Pin K: RF Input Pin E: RF Output Pin L: Input Ground Pin F: Output Ground Pin A, B, C, D, G, H, I, J: To be Ground □: Date code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4