TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: IF SAW Filter 464 MHz(SMD 7.0X5.0mm) TST Parts No.:TB0459A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Lee Approval by: Francis Chen Date: 2008/01/28 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 464 MHz SMD 7X5mm MODEL NO.: TB0459A Rev No.1 A. MAXIMUM RATING: 1.Operating Temperature: -40 °C ~ +85 °C 2. Storage Temperature: -40 °C ~ +85 °C 3. Input Power Level: 10 dBm RoHS Compliant Lead free Lead-free soldering B. Characteristics : 1. Ambient Temperature: 25 °C 2. Optimal Source Impedance(Balanced): 200 ohm 3. Optimal Load Impedance(Balanced): 200 ohm Characteristics Min. Value Typ. Max. Note FC MHz - 464 - - Minimum Insertion Loss dB - 15.5 18.0 - Center frequency 1dB Bandwidth MHz 5.45 5.52 - - 3dB Bandwidth Passband Ripple (Fc±2.5MHz) MHz dB - 5.68 5.90 - - 1.2 1.5 - ±0.05 0.1 - ±0.05 0.1 ±0.46 1 ±0.43 1 Amplitude Ripple at any 26.875kHz adjacent -0.1 segment within 5 MHz dB Amplitude Ripple at any 24.6875kHz adjacent -0.1 segment within 5 MHz dB Phase Linearity at any 26.875kHz adjacent -1 segment within 5 MHz Deg. Phase Linearity at any 24.6875kHz adjacent -1 segment within 5 MHz Deg. Attenuation:( Reference level from minimum insertion loss) 1) Fc±3MHz dB 2) Fc±3.5MHz 10 dB 3) Fc±5MHz dB 36 4) 376MHz ~ 459 MHz 5) 469MHz ~ 552 MHz Temp Coefficient dB dB ppm/° C2 32 34 dB 8.9 - - 33 - - 42 - 36 39 -0.036 - - TAI-SAW TECHNOLOGY CO., LTD. - 2 - TST DCC Release document C. Measurement Circuit: (1) Single end 50 ohm to Single end 50 ohm (2) Balanced 200 ohm to Balanced 200 ohm TAI-SAW TECHNOLOGY CO., LTD. - 3 - TST DCC Release document D. PCB FOOTPRINT: E. Frequency Characteristics : (1) S21 Response Fig1. Horizontal: 10MHz/Div Vertical: 10dB/Div TAI-SAW TECHNOLOGY CO., LTD. - 4 - TST DCC Release document (2) Passband Ripple Fig2. Horizontal: 0.8 MHz/Div Vertical: 1dB/Div Horizontal: 0.8 MHz/Div Vertical: 50nS/Div (3) Group Delay ripple Fig3. TAI-SAW TECHNOLOGY CO., LTD. - 5 - TST DCC Release document (4) Wideband Response Fig4. Horizontal: 300kHz~1GHz Vertical: 10dB/Div F. Outline Drawing: Pin J,L : Balanced Input Pin F,D : Balanced Output Pin A,B ,C ,I,H,G : To be Ground TAI-SAW TECHNOLOGY CO., LTD. - 6 - TST DCC Release document □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b G. PACKING: 1. REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. - 7 - TST DCC Release document 2. TAPE DIMENSION 4 5 9 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. - 8 - TST DCC Release document