LLDB3 SEM ICOND UCTOR LL-34 Hermetically Sealed Glass BI-directional Trigger Diode SURFACE MOUNT LL34 Absolute Maximum Ratings Symbol TA = 25°C unless otherwise noted Parameter Value Units 150 mW PD Power Dissipation @ Ta = 50℃ ITRM Repetitive peak on-state current tp = 20us, F = 120Hz 2 A T stg Tj Storage temperature range Operating junction temperature -40 ~ 125 °C DEVICE MARKING DIAGRAM Band Color : Green These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features: VBO = 32V LL-34 (Mini-MELF) Package Surface Device Type Mounting Hermetically Sealed Glass Compression Bonded Construction All External Surfaces Are Corrosion Resistant And Terminals Are Readily Solderable RoHS Compliant Matte Tin (Sn) Terminal Finish Electrical Characteristics Parameter Symbol VBO [VBO’-VBO] [V] TA = 25°C unless otherwise noted Limits Test Condition Breakover Voltage C = 22nF (note 2) Breakover Voltage Symmetry C = 22nF (note 2) Dynamic Breakover Voltage VBO and VF at 10mA Unit Min Max 28 36 Volts 3 Volts 5 Volts 5 Volts See diagram 2 Vo Output Voltage IBO Breakover Current C = 22nF (note 2) 50 uA TR Rise Time See diagram 3 2 uS IB Leakage Current VR = 0.5VBO max 10 uA IP Peak Current See diagram 2 0.3 A (R = 20Ω) Notes: 1. All parameters applicable to both forward and reverse directions. 2. Connected in parallel in the device Number: DB-144 Jan.2011 / B Page 1 SEM ICOND UCTOR DIAGRAM 1: VOLTAGE – CURRENT CHARACTERISTIC CURVE DIAGRAM 2: TEST CIRCUIT DIAGRAM 3: RISE TIME MEASUREMENT Package Outline Package Case Outline B LL-34 DIM Inches Min Max Min Max A 3.30 3.60 0.130 0.142 B 1.40 1.50 0.055 0.059 C 0.35 0.50 0.014 0.020 A LL34 Millimeters C Notes: 1. All dimensions are within DO213AC JEDEC standard. Number: DB-144 Jan.2011 / B Page 2 DISC LA IMER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information previously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. Number: DB-111 April 29, 2008 / A