S1A THRU S1M 50V-1000V 1.0A SURFACE MOUNT GENERAL PURPOSE RECTIFIERS Features • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Glass passivated chip junction • For surface mount application • Low profile package • Built-in strain relief, ideal for automated placement Mechanical Data • Case: SMA (DO-214AC), molded plastic • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes cathode end Maximum Ratings and Electrical Characteristics Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TL = 100°C @TA=25°C unless otherwise specified Symbol S1A S1B S1D S1G S1J S1K S1M Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Forward Voltage @IF = 1.0A VFM 1.10 V @TA = 25°C @TA = 125°C IRM 5.0 200 µA Cj 15 pF 30 °C/W -65 to +175 °C Peak Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range R JL Tj, TSTG Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A, 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land area. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com S1A THRU S1M 50V-1000V 1.0A SURFACE MOUNTGENERAL PURPOSE RECTIFIERS IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE OUTPUT CURRENT (A) 1.0 0.8 0.6 0.4 0.2 Resistive or inductive load 0 40 60 80 100 120 140 160 10 1.0 0.1 0.01 0 180 0.4 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TL , LEAD TEMPERATURE ( °C) Fig. 1 Forward Current Derating Curve 100 100 PEAK FORWARD SURGE CURRENT, A INSTANTANEOUS REVERSE CURRENT( A) Tj = 25° C PULSE WIDTH = 300µs 2% DUTY CYCLE 10 TJ=125 C 1 TJ=75 C 0.1 TJ =25 C 0.01 TL =110 C 8.3ms Single half Sine Wave (JEDEC Method) S1(A.J) 10 S1(K.M) 1 0.001 0 20 40 60 80 1 100 100 10 NUMBER OF CYCLES AT 60Hz PERCENT OF RATED PEAK REVERSE VOLTS,% FIG.4- PEAK FORWARD SURGE CURRENT JUNCTION CAPACITANCE, pF 100 TJ=25 C f=1.0MHz Vsig=50mVp-p 10 1 0.01 0.1 1 10 100 TRANSIENT THERMAL IMPEDANCE ( oC/W) FIG.3-TYPICAL REVERSE CHARACTERISTICS FIG.6- TRANSIENT THERMAL IMPEDANCE 1000 S1(K.M) 100 S1(A.J) 10 1 0.01 0.1 1 10 100 t, PULSE DURATION REVERSE VOLTAGE, V FIG.5- TYPICAL JUNCTION CAPACITANCE E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com