TIGER ELECTRONIC CO.,LTD W005M THRU W10M SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 TO 1000V CURRENT:1.5A FEATURES Ideal for printed circuit board Surge overload rating: 50A peak High case dielectric strength MECHANICAL DATA . Terminal: Plated leads solderable per MIL-STD 202E, method 208C . Case: UL-94 Class V-0 recognized Flame Retardant Epoxy . Polarity: Polarity symbol marked on body . Mounting position: any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 , unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL W005M W01M W02M W04M W06M W08M W10M units v v v Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 800 1000 Maximum RMS Voltage Vrms 35 70 140 280 420 560 700 Vdc 50 100 200 400 600 800 1000 Maximum DC blocking Voltage Maximum Average Forward Rectified current at Ta=25 If(av) 1.5 A Ifsm 50 A Vf 1.0 V 10.0 A mA Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 1.5A DC Maximum DC Reverse Voltage Ta=25 at rated DC blocking voltage Ta=100 Ir 1.0 Operating Temperature Range Tj -55 to +125 Tstg -55 to +150 Storage and operation Junction Temperature W005M THRU W10M SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 TO 1000V CURRENT:1.5A RATINGS AND CHARACTERISTIC CURVES W005M THRU W10M FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE FIG.4-TYPICAL REVERSE CHARACTERISTICS