NTC Thermistor for Automotive: TSM-C Series SMD NTC Thermistor for Temperature Sensing Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 ℃ 3. Superior stability in high-temperature and high-humidity environment 4. RoHS compliant Recommended Applications 1. Car audio, car navigation 2. Various engine control units 3. Circuits for ETC equipment 4. Various motor driving circuits 5. Temperature compensation for various circuits Part Number Code 1 Product Type THINKING TSM NTC Thermistor TSM Series 2 3 Size (EIA) A 0 1 2 0201 0402 0603 0805 4 5 6 Definition of B Value C D B25/85 B25/50 7 8 9 Tolerance of R25 F G H J K 11 First Two Digits of B Value ±1% ±2% ±3% ±5% ±10% 30 31 32 ： ︰ 40 41 ︰ Zero Power Resistance at 25℃ (R25) 102 103 473 10 10x102Ω= 1 KΩ 10x103Ω=10 KΩ 47x103Ω=47KΩ 12 13 Last Two Digits of B Value 30 31 32 ： ︰ 40 41 0 A 1 B 2 ︰ H 8 J 9 K ︰ 00 05 10 15 20 ︰ 75 80 85 90 95 14 15 16 Optional Suffix Tolerance of B Value 1 2 3 ±1% ±2% ±3% Packaging R B Reel Bulk Structure and Dimensions (Unit: mm) THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. Part No. Size L1. W H max. L2 & L3 TSM1 0603 1.60±0.15 0.80±0.15 0.95 0.40±0.15 TSM2 0805 2.00±0.20 1.25±0.20 1.20 0.40±0.20 1 www.thinking.com.tw 2011.06 NTC Thermistor for Automotive: TSM-C Series SMD NTC Thermistor for Temperature Sensing Electrical Characteristics Part No. Zero Power Resistance at 25°C Tolerance of R25 B Value Tolerance of B value Max. Power Dissipation at 25℃ Dissipation Factor Thermal Time Constant Operating Temperature Range R25(KΩ) ( ±%) (K) (±%) Pmax(mW) δ(mW/°C) τ(Sec.) TL~TU(°C) 3 210 Approx. 2.1 Approx. 3.1 -50 ~ +150 3 240 Approx. 2.4 Approx. 5.4 -50 ~ +150 TSM1C103F34D3R 10 25/85 3435 TSM1C103F39H3R 10 25/85 3975 TSM1C473F39H3R 47 25/85 3975 TSM2C103F34D3R 10 25/85 3435 TSM2C103F39H3R 10 25/85 3975 TSM2C473F39H3R 47 25/85 3975 Note 1: 1、2、3 1、2、3 □ = Tolerance of R25 *Special specifications are available upon request Max. Power Dissipation Derating Curve TU：Maximum operating temperature (℃) 100 TL：Minimum operating temperature (℃) For example： Ambient temperature (Ta)=55℃ Maximum operating temperature (TU)＝150℃ PTa=(TU-Ta)/(TU-25)×Pmax＝76% Pmax 0 TL 0 25 TU Ambient temperature (℃) THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 2 www.thinking.com.tw 2011.06 NTC Thermistor for Automotive: TSM-C Series SMD NTC Thermistor for Temperature Sensing R-T Characteristic Curves (representative) TSM 0603 Automotive Series 10000.0 1000.0 Resistance(KΩ Ω) 100.0 10.0 1.0 TSM1C473F39H3R TSM1C103F34D3R TSM1C103F39H3R 0.1 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Temperature (℃) TSM 0805 Automotive Series 10000.0 Resistance(KΩ Ω) 1000.0 100.0 10.0 1.0 TSM2C473F39H3R TSM2C103F34D3R TSM2C103F39H3R 0.1 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Temperature (℃) THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 3 www.thinking.com.tw 2011.06 NTC Thermistor for Automotive: TSM-C Series SMD NTC Thermistor for Temperature Sensing Soldering Recommendation IR-reflow Soldering Profile Peak temp Preheating Cooling Temperature 255~260°C 60~150 sec 217°C 150±20℃ 150~200°C Tamb t 3°C /sec (max.) 60~180 sec 8 minutes max 3°C/sec 20~40 sec (max.) 6°C /sec (max.) Time Reworking Conditions with Soldering Iron Item Conditions Temperature of Soldering Iron-tip 360℃(max.) Soldering Time 3 sec (max.) Diameter of Soldering Iron-tip Φ3mm (max.) Caution: Do not touch the component surface with soldering iron directly to prevent it from damage. Recommended Soldering Pad Dimensions X Y G Z Size Z (mm) G (mm) X (mm) Y (mm) 0603 3.0 1.0 1.0 1.0 0805 3.4 1.0 1.4 1.2 THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 4 www.thinking.com.tw 2011.06 NTC Thermistor for Automotive: TSM-C Series SMD NTC Thermistor for Temperature Sensing Reliability (based on AEC-Q200 Rev-C) Item Standard High Temperature MIL-STD-202 Exposure (Storage) Method 108 Test conditions / Methods Specifications Test temp. ：150 +3/-0°C No visible damage Duration: 1000 h Unpowered Measurement at 24±2 hours after test conclusion. ∣△R25/R25∣≦ 5 % Lower test temp.：-55 +0/-3°C Upper test temp.：150 +3/-0°C Temperature Cycling JESD22 Method JA-104 Soak Time at Lower or Upper Temperature：1 min No visible damage ∣△R25/R25∣≦ 5 % Cycle time：2 Cycles/hr Number of cycles：1000 Measurement at 24±2 hours after test conclusion. Duration of 1 cycle: 24 h Number of cycles: 10，Unpowered Measurement at 24±2 hours after test conclusion. Temp. Step Moisture MIL-STD-202 Resistance Method 106 humidity Period Start Finish (%) (hr) 1 25 65 90~100 2.5 No visible damage 2 65 65 90~100 3 ∣△R25/R25∣≦ 5 % 3 65 25 80~100 2.5 4 25 65 90~100 2.5 5 65 65 90~100 3 6 65 25 80~100 2.5 7 25 25 80~100 8 Test temp.：85°C Rel. humidity of air： 85% Biased Humidity MIL-STD-202 Method 103 No visible damage Duration: 1000 h ∣△R25/R25∣≦ 5 % 10% Rated Power. Measurement at 24±2 hours after test conclusion. THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 5 www.thinking.com.tw 2011.06 NTC Thermistor for Automotive: TSM-C Series SMD NTC Thermistor for Temperature Sensing Item Test conditions / Methods Standard Specifications Test temp.: 150 +3/-0°C Operational Life MIL-STD-202 Duration: 1000 h No visible damage ∣△R25/R25∣≦ 5 % Method 108 Test Power：1mW Measurement at 24±2 hours after test conclusion. External Visual Physical Dimension MIL-STD-883 Method 2009 JESD22 Method JB-100 Resistance to MIL-STD-202 Solvents Method 215 Inspect device construction, marking and workmanship. No visible damage Verify physical dimensions to the applicable device Within the specified specification. values Per MIL-STD-202 Method 215 Solvent 1: 1 part (by volume) of isopropyl alcohol 3 part No visible damage (by volume) of mineral spirits. Test Condition F Peak value：1500g's Mechanical Shock MIL-STD Half sine Waveform No visible damage -202-213 Normal duration (D)： 0.5ms ∣△R25/R25∣≦ 5 % In 3 directions perpendicularly intersecting each other (total 18 times). Acceleration：5 g's Vibration MIL-STD-202 Sweep time: 20 min No visible damage ∣△R25/R25∣≦ 5 % Method 204 Frequency range: 10 to 2000 Hz 3×12 cycles Condition B No pre-heat of samples. Resistance to Soldering Heat MIL-STD-202 Temperature：260±5°C,Time ：10±1s No visible damage Method 210 Immersion and emersion rate：25mm/s ±6 mm/s ∣△R25/R25∣≦ 5 % Number of heat cycles：1 Lower test temp.：-55 +0/-3°C Upper test temp.：150 +3/-0°C Thermal Shock MIL-STD-202 Method 107 Maximum transfer time：20 seconds. Dwell time：15 minutes. Air-Air. No visible damage ∣△R25/R25∣≦ 5 % Number of cycles：300 THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 6 www.thinking.com.tw 2011.06 NTC Thermistor for Automotive: TSM-C Series SMD NTC Thermistor for Temperature Sensing Item Standard Test conditions / Methods Specifications Discharge capacitance：150 pF ESD AEC-Q200 Charging voltage: 6 kV -002 No visible damage ∣△R25/R25∣≦ 5 % Contact discharge 1 pulse in each polarity a) 4 h @ 155°C dry heat Solderability J-STD-002 Dip @235±5°C b)Steam aging 8 h±15min @93±3°C Dip @260±5°C Electrical Characterization 95% of termination wetted 7±0.5sec R(-50°C) 、R(25°C) 、R(150°C) Specifications AEC-Q200 Board Flex 5 +0/-0.5sec -005 Within the specified values B(R25°C/R85°C) Bend the board：2mm (Min.) Duration of the applied forces ：60 (+5) Sec (JIS-C-6429) No visible damage ∣△R25/R25∣≦ 5 % Apply force： AEC-Q200 Terminal Strength -006 (JIS-C-6429) No visible damage 0603=1.0kg (10 N) ∣△R25/R25∣≦ 5 % 0805=1.8kg (17.7 N) Duration of the applied forces ：60 (+1) Sec THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 7 www.thinking.com.tw 2011.06 NTC Thermistor for Automotive: TSM-C Series SMD NTC Thermistor for Temperature Sensing Package Taping Specification (Unit: mm) A0 B0 W E F P1 P2 P0 D0 K0 ±0.2 ±0.2 ±0.2 ±0.1 ±0.05 ±0.1 ±0.05 ±0.1 ±0.1 ±0.1 0603 1.1 1.9 8 1.75 3.5 4 2 4 1.55 0.95 0805 1.5 2.3 8 1.75 3.5 4 2 4 1.55 0.95 Index Type Quantity Type Quantity (pcs/reel) 0603 4,000 0805 3,500 Storage Conditions of Products Storage Conditions : 1. Storage Temperature: -10℃~+40℃ 2. Relative Humidity: ≦75%RH 3. Keep away from corrosive atmosphere and sunlight. Shelf Life : 1 year THINKING ELECTRONIC INDUSTRIAL CO., LTD. All specifications are subject to change without notice. 8 www.thinking.com.tw 2011.06