Part Number 856824 897.5 MHz SAW Filter Data Sheet Features For Base Station applications Usable bandwidth 35 MHz For Base Station applications Low loss Single-ended operation No impedance matching for operation at 50 Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 3.00 x 3.00 x 1.22 mm Bottom View 1.22 NOM. 1.32 MAX. 1 2 3 6 5 4 0.69 3.00 0.75 1.50 3.00 Pin No. 2 5 1,3,4,6 0.75 Description Input Output Case ground 0.60 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0 m, over a 2 - 6 m Ni plating Subject to change or obsolescence without notice Rev A 06/10 TriQuint Semiconductor, Inc. © Page 1 of 5 Part Number 856824 897.5 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -30 to +85 oC Parameter (3) Center Frequency Minimum Insertion Loss 880 – 915 MHz Amplitude Variation 880 – 915 MHz Amplitude Variation( over any 5 MHz band) 880 – 915 MHz Phase Ripple 880 – 915 MHz Absolute Group Delay 880 – 915 MHz Group Delay Variation 880 – 915 MHz Input Return Loss 880 – 915 MHz Output Return Loss 880 – 915 MHz Relative Attenuation (5) 180 – 220 MHz 440 – 458 MHz 656 – 695 MHz 695 – 735 MHz 735 – 738 MHz 738 – 773 MHz 818 – 866 MHz 984 – 1227 MHz 1296 – 1331 MHz 1596 – 1632 MHz 1968 – 2454 MHz 3056 – 3577 MHz Source Impedance (single-ended) (6) Load Impedance (single-ended) (6) Minimum Typical (4) Maximum Unit - 897.5 - MHz - 1.4 2.5 dB - 0.5 1.6 dB p-p - 0.35 0.8 dB p-p - 12.0 25 degree 20.0 35 nsec 13.0 25 nsec 9.5 12.4 - dB 9.5 12.8 - dB 20 25 20 25 20 29 6 10 35 37 30 18 - 43.0 39.0 36.0 34.0 43.0 38.0 11.0 31.0 39.0 48.0 42.0 24.0 50 50 - dB dB dB dB dB dB dB dB dB dB dB dB - Notes: 1. 2. 3. 4. 5. 6. All specifications are based on TriQuint test circuit shown on page 4 In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances Typical values are based on average measurements at room temperature Relative to Maximum Insertion Loss in passband This is the optimum impedance in order to achieve the performance shown Subject to change or obsolescence without notice Rev A 06/10 TriQuint Semiconductor, Inc. © Page 2 of 5 Part Number 856824 897.5 MHz SAW Filter Data Sheet Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev A 06/10 TriQuint Semiconductor, Inc. © Page 3 of 5 Part Number 856824 897.5 MHz SAW Filter Data Sheet Matching Schematics 2 50 Single-ended 50 5 50 Single-ended 50 1,3,4,6 Marking PCB Footprint 3.20 SQ TriQuint logo .96 Marking code EH 1.70 JJJYM 1.27 .81 ID dot .38 Date code The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 12.8 2.7 ID dot TriQuint logo 4.0 0.21 2.0 Ø330 Ø1.5 A 1.75 5.5 12.0 3.25 Ø102 Ø20.2 Ø13.0 2.0 Direction of travel 1.4 3.25 4.0 A Ø1.5 Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel Subject to change or obsolescence without notice Rev A 06/10 TriQuint Semiconductor, Inc. © Page 4 of 5 Part Number 856824 897.5 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Input Power (1) Symbol Minimum Maximum T Tstg Pin -30 -40 - +85 +85 +22 Unit o C C dBm o Note: 1. Input Power is targeted for an applied CW modulated RF signal at 55 ºC for 125 hours Important Notes Warnings Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance Pb This product complies with EU directive 2002/95/EC (RoHS) Solderability Compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters RoHS Information Soldering Profile Other Technical Information TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: [email protected] Web: www.triquint.com Rev A 06/10 Or contact one of our worldwide Network of sales offices, Representatives or distributors TriQuint Semiconductor, Inc. © Page 5 of 5