MBRF10L100CT CREAT BY ART 10.0AMPS Isolated Low VF Schottky Barrier Rectifier ITO-220AB Pb RoHS COMPLIANCE Features Low power loss, high efficiency High current capability, low forward voltage drop Plastic material used carries Underwriters Laboratory Classifications 94V-0 High Surge current capability Qualified as per AEC-Q101 Guard-ring for transient protection For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed: 260℃/ 10 seconds, 0.375"(9.5mm) lead lengths 5 lbs tension Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Dimensions in inches and (millimeters) Marking Diagram Case: ITO-220AB Terminals: Pure tin plated, lead free, solderable per MIL-STD-202, Method 208 guaranteed MBRF10LXXCT = Specific Device Code G = Green compound Polarity: As marked Y = Year Mounting position: Any WW = Work Week Mounting torque: 5 in-lbs. Max. Weight: 1.7 grams Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol MBRF10L100CT Unit Maximum Repetitive Peak Reverse Voltage VRRM 100 V Maximum RMS Voltage VRMS 70 V Maximum DC blocking voltage VDC 100 V Maximum Average Forward Rectified Current IF(AV) 10 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) IF(RMS) 10 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 120 A Peak Repetitive Reverse Surge Current (Note 1) IRRM Maximum Instantaneous Forward Voltage at (Note 2) IF = 5A, TA=25℃ IF = 5A, TA=125℃ IF = 10A, TA=25℃ IF = 10A, TA=125℃ Maximum Reverse Current at Rated DC Blocking Voltage TA=25 ℃ TA=125 ℃ Voltage rate of change (Rated VR) VF IR 1 A TYP MAX 0.73 0.76 0.59 0.65 0.82 0.85 0.66 0.71 TYP MAX 0.3 20 0.5 15 V uA mA dV/dt 10,000 Typical Junction Capacitance (Note 3) Cj 185 Maximum Thermal Resistance Per Leg RθJC 5.5 TJ -55 to + 150 O TSTG -55 to + 150 O Operating Temperature Range Storage Temperature Range V/uS pF O C/W C C Note1: 2.0uS Pulse Width, F=1.0KHz, Continues 10 Cycles Note2: Pulse Test : 300us Pulse Width, 1% Duty cycle Note3: Measure at 1MHz and Applied Reverse Voltage of 4.0V D.C. Version:C11 RATINGS AND CHARACTERISTIC CURVES (MBRF10L100CT) FIG. 2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.1 MAXIMUM FORWARD CURRENT DERATING CURVE 150 10 5 RESISTER OR INDUCTIVE LOAD 0 0 25 50 75 100 125 150 8.3ms Single Half Sine Wave JEDEC Method 125 PEAK FORWARD SURGE CURRENT(A) AVERAGE FORWARD CURRENT (A) 15 100 75 50 25 0 175 1 CASE TEMPERATURE (℃) FIG. 3 TYPICAL FORWARD CHARACTERISTICS 100 FIG. 4 TYPICAL REVERSE CHARACTERISTICS 10000 INSTANTANEOUS REVERSE CURRENT (uA) 100 INSTANTANEOUS FORWARD CURRENT (A) 10 NUMBER OF CYCLES AT 60 Hz TA=125℃ 1000 TA=125℃ 10 1 TA=25℃ 100 10 1 0.1 TA=25℃ 0.01 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 10 FORWARD VOLTAGE (V) FIG. 5 TYPICAL JUNCTION CAPACITANCE 20 30 40 50 60 70 PERCENT OF VR (%) 80 90 100 FIG. 6 TYPICAL TRANSIENT THERMAL IMPEDANCE 1000 TRANSIENT THERMAL IMPEDANCE(℃/ W) CAPACITANCE (pF) 100 100 TA=25℃ f=1.0MHz Vsig=50mVp-p 10 1 0.1 0.01 10 0.1 1 10 REVERSE VOLTAGE (V) 100 0.1 1 10 100 T-PULSE DURATION(s) Version:C11