S2AA - S2MA CREAT BY ART 1.5AMPS Surface Mount Rectifiers SMA/DO-214AC Pb RoHS COMPLIANCE Features For surface mounted application Glass passivated junction chip Low forward voltage drop High current capability Easy pick and place High surge current capability Plastic material used carries Underwriters Laboratory Classification 94V-0 High temperature soldering: 260℃/10 seconds at terminals Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Dimensions in inches and (millimeters) Marking Diagram Case: Molded plastic Terminal: Pure tin plated, lead free Polarity: Indicated by cathode band G = Green Compound Packaging: 12mm tape per EIA STD RS-481 Y = Year Weight: 0.064 grams M = Work Month S2XA = Specific Device Code Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% S2 BA 100 S2 DA 200 S2 GA 400 S2 JA 600 S2 KA 800 S2 MA 1000 Maximum Recurrent Peak Reverse Voltage VRRM S2 AA 50 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TL=100℃ IF(AV) 1.5 A Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method) IFSM 50 A Maximum Instantaneous Forward Voltage (Note 1) @ 1.5A VF 1.1 V Maximum DC Reverse Current at Rated DC Blocking Voltage IR Type Number @ T A=25 ℃ @ T A=125 ℃ Symbol Units V 5 uA 125 uA Maximum Reverse Recovery Time (Note 2) Trr 1.5 uS Typical Junction Capacitance (Note 3) Cj 30 pF RθJL RθJA 16 53 TJ - 55 to + 150 O C - 55 to + 150 O C Typical Thermal Resistance Operating Temperature Range Storage Temperature Range TSTG O Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: I F=0.5A, I R=1.0A, I RR=0.25A Note 3: Measured at 1 MHz and Applied V R=4.0 Volts Version:F11 C/W RATINGS AND CHARACTERISTIC CURVES (S2AA THRU S2MA) FIG. 2- TYPICAL REVERSE CHARACTERISTICS FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 10 1.5 1 RESISTIVE OR INDUCTIVE LOAD 0.5 0 50 60 70 80 90 100 110 120 130 140 150 LEAD TEMPERATURE (oC) INSTANTANEOUS REVERSE CURRENT (uA) AVERAGE FORWARD CURRENT (A) 2 TA=125℃ TA=100℃ 1 0.1 TA=25℃ 50 PEAK FORWARD SURGE URRENT (A) 0.01 FIG. 3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 8.3mS Single Half Sine Wave JEDEC Method 40 30 20 10 0 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 4- TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) 100 10 TA=25℃ f=1.0MHz Vsig=50mVp-p 1 0.1 1 10 REVERSE VOLTAGE (V) FIG. 5- TYPICAL FORWARD CHARACTERISRICS 10 INSTANTANEOUS FORWARD CURRENT (A) 1 100 1 0.1 TA=25℃ Pulse Width=300us 1% Duty Cycle 0.01 0.4 0.6 0.8 1 1.2 FORWARD VOLTAGE (V) 1.4 Version:F11 1.6